Jtek ShiftMate 3
£29.99
was
£29.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
This model is for mating newer 2001+ Campagnolo 9 & 10 speed components with Shimano 9 & 10 speed components.
- Shimano 9 & 10 speed shifters to Campagnolo 9 & 10 speed cassettes & derailleur
- Campagnolo 9 & 10 speed shifters to Shimano 9 & 10 speed cassettes & derailleur
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Wide range of component mates and interfacing.
- Small compact design only 12 grams.
- Save money by upgrading over time or using components and wheelsets you already own.
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleur
For installation you will require a gear cable end cap with an external diameter of 5.3mm.
The Clarks Plastic Gear Ferrule for 4 mm Gear Outer Cable meets this specification (SJSC part 5269)
- Shimano 9 & 10 speed shifters to Campagnolo 9 & 10 speed cassettes & derailleur
- Campagnolo 9 & 10 speed shifters to Shimano 9 & 10 speed cassettes & derailleur
Using a ratio changing pulley, the ShiftMate adapts different component brands and models to make the proper correction in the amount of cable pull needed for perfect shifting. There are no comprimises when using a ShiftMate. Your shifting will perform equally or better than original factory components.
- CNC machined.
- Sealed ball bearing.
- Hard Nickel plating.
- Reduces cable friction and cable housing length.
- Wide range of component mates and interfacing.
- Small compact design only 12 grams.
- Save money by upgrading over time or using components and wheelsets you already own.
*Except Shimano Tiagra 4700 10 speed shifters and rear derailleur
For installation you will require a gear cable end cap with an external diameter of 5.3mm.
The Clarks Plastic Gear Ferrule for 4 mm Gear Outer Cable meets this specification (SJSC part 5269)
Specification
Downloads
Download File
Related products
Shimano SIS 1.2 mm Gear Inner Cable Wire
£2.29 Inc VAT
Quick view
Clarks Plastic Gear Ferrule for 4 mm Gear Outer Cable - Each
£0.20 Inc VAT
Quick view
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
By Anonymous
10 Feb 2018
5 / 5
I recommend this product
ConsCierta dificultad de montaje
ProsCorrecto funcionamiento
Un producto que resuelve perfectamente la incompatibilidad entre unas manetas Campagnolo 10v con un cambio y un cassette Shimano de 10v haciendo que el conjunto funcione correctamente.
Tiene cierta dificultad de montaje al no ver las instrucciones en español.
Mi caso era poner un cassette con un piñón de 34 dientes lo cual no es posible con Campagnolo.
Para ello junto a este elemento he precisado colocar una pieza que suplementa la patilla del cuadro y colocar un cambio Shimano105 de caja larga
Tiene cierta dificultad de montaje al no ver las instrucciones en español.
Mi caso era poner un cassette con un piñón de 34 dientes lo cual no es posible con Campagnolo.
Para ello junto a este elemento he precisado colocar una pieza que suplementa la patilla del cuadro y colocar un cambio Shimano105 de caja larga
A Dream Come True!!
By Wm. Monaghan
04 Jul 2017
5 / 5
I recommend this product
Being a true Campagnolo nut forever, I am so happy to be able to now have a way to use my older Mavic wheels with Shimano HG freehub body with Campy spacers. With the Shiftmates I can now use any cassette and it works perectly.
Superb Answer For Matching Campag And Shimano
By Brian Haxby
19 Jun 2017
5 / 5
I recommend this product
ConsPrice until you realize how good it is.
ProsEasy to fit, works perfectly.
Due to age and injuries I can no longer stand on the pedals so need a very low bottom gear which is not possible with Campag, I have an Italian frame with Mirage 3 x 9. By using the Shiftmate I have been able to fit a Shimano long cage rear mech and 12-36 cassette which gives me all the gears I need and I still have the excellent Campag levers, chainset and front mech.
Very Cool Solution.
By Focus77
10 Jun 2017
5 / 5
I recommend this product
ConsVery fiddly to fit.
ProsNicely engineered solution which works perfectly
I use the shiftmate 3 to match my shimano sora 9 speed shifters to my campagnolo mirage and chorus cassette. I did have it shifting reasonably well on a straight cable. After hours of adjusting.
But with this neat device my shifts are super crisp and I was able to dial in the indexing in a few minutes.
But with this neat device my shifts are super crisp and I was able to dial in the indexing in a few minutes.
Unique, Well Engineered
By cyclenorm
14 Apr 2017
4 / 5
I recommend this product
Consless than perfect output connection to derailleur adjusting barrel
ProsInexpensive, well finished
A simple, elegant solution, giving users the ability to cherry pick components. I use the Shiftmate on our two tandems to link Campagnolo shifters (whose shift action I prefer) with old SRAM and Shimano Ultergra derailleurs (because Campagnolo derailleurs don't provide the range we need.)
By Jaafar
14 Aug 2016
5 / 5
I recommend this product
ConsShould add microshift in the table
ProsIt works well save a lot to upgrade
My combination is campy 10s shifter microshift 10s rear Dee & XT 10s cassette 11-36 but need to replaced the top jockey wheel to 10t then it works well
A Very Nifty Piece Of Kit
By Iwan
18 May 2016
5 / 5
I recommend this product
Used this to pair campag shifters with a Shimano drivetrain. Easy to install and shifts perfectly. Great product and excellent service by sjs cycles.
Shiftmate
By Anonymous
18 Feb 2013
5 / 5
I recommend this product
Conshigh price
Prosworks perfectly
I ordered the #3 to mate my shimano 10 speed ultegra set up to campagnolo centaur shift/brake levers and this little gadget works wonders, really smooth gear changes, it looks a little awkward perhaps
10Sp Xt Users Beware
By Bill
15 May 2012
5 / 5
I recommend this product
Consshape
Prosquality
If you want to use one of these with a new XT derailleur that has a near straight cable run it may not fit. I swapped mine for a straight Shiftmate (SRAM flavoured) and a Shimano pulley wheel #3.
It is possible to use this model, but the cable run with the Shiftmate straight works better because both ends of the cable outer terminate in a 'socket' giving a smoother route.
As to shifting performance, it works a treat, 10sp Campagnolo ergo levers to a XT derailleur and 10sp XT cassette, no problem.
It is possible to use this model, but the cable run with the Shiftmate straight works better because both ends of the cable outer terminate in a 'socket' giving a smoother route.
As to shifting performance, it works a treat, 10sp Campagnolo ergo levers to a XT derailleur and 10sp XT cassette, no problem.
Questions & Answers (5)
Can use this to mix Shimano flatbar shifters with campagnolo centaur 10sp. derailleur ?
By Claus
28 Jun 2022
SJS Customer Service:
Hi,
For Shimano 10 spd mountain with Campagnolo derailleur and Campagnolo 10 spd cassette use the Shiftmate 5.
Thanks
For Shimano 10 spd mountain with Campagnolo derailleur and Campagnolo 10 spd cassette use the Shiftmate 5.
Thanks
Shiftmate and 6-speed Suntour?
By Karri
26 Dec 2018
I need new a derailleur for my old 6-speed freewheel and was looking Shimano Sora (9-speed).
Does 9-speed shifter and Sora derailleur work with my 6-speed freewheel if I choose Shiftmate 3?
Does 9-speed shifter and Sora derailleur work with my 6-speed freewheel if I choose Shiftmate 3?
SJS Customer Service:
Hi there,
This combination will work absolutely fine.
Thanks.
This combination will work absolutely fine.
Thanks.
Compatibilidad Campagnolo Shimano
By MIGUEL ANGEL con LOPEZ DE SABANDO
16 Jan 2018
Tengo unas manetas Campagnolo Record de 10 velocidades del año 2007 o 2008 con un cambio Shimano
105 de 10 velocidades referencia (RD-5701-GS) y un cassette Shimano Deore Dyna Sys de 10 velocidades y desearía saber si con la colocación de un Jtek Shiftmate conseguiría que el conjunto fuese compatible y funcionase correctamente.
¿En caso afirmativo que número de Jtek Shiftmate sería el adecuado?
¿Sería conveniente colocar un Jtek FERRULE CURVED o STRAIGHT?
Mi biicleta es de carretera
105 de 10 velocidades referencia (RD-5701-GS) y un cassette Shimano Deore Dyna Sys de 10 velocidades y desearía saber si con la colocación de un Jtek Shiftmate conseguiría que el conjunto fuese compatible y funcionase correctamente.
¿En caso afirmativo que número de Jtek Shiftmate sería el adecuado?
¿Sería conveniente colocar un Jtek FERRULE CURVED o STRAIGHT?
Mi biicleta es de carretera
SJS Customer Service:
Hi there,
You will require Shiftmate 3 to convert a Campagnolo 10spd shifter to work with Shimano 10spd derailleur and cassette.
Thanks.
You will require Shiftmate 3 to convert a Campagnolo 10spd shifter to work with Shimano 10spd derailleur and cassette.
Thanks.
Do It Require The Cable Piping To Be Shortened?
By Charlie
08 Jun 2017
SJS Customer Service:
Hi we would shorten the cable outer for both better looks and performance.
Shiftmate 3 With Xt Rear Mech
By Alan
01 Dec 2016
Will the curved shiftmate 3 work with the straight cable feed into an XT derailleur? If not, is there a straight equivalent shiftmate for Campag 10sp shifters, XT mech, and Shimano 10sp cassette?
SJS Customer Service:
Hi,
There isn't a straight version of the the ShiftMate 3 I'm afraid, but the curved version should still work. The cable routing may not be ideal, but it should still work.
Thanks.
There isn't a straight version of the the ShiftMate 3 I'm afraid, but the curved version should still work. The cable routing may not be ideal, but it should still work.
Thanks.