Problem Solvers XL Caliper Brake Mounting Bolt for Carbon / Thick Nut - Each
£8.99
was
Length
£8.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
XL Brake Mounting recessed nut.
For Carbon Road type forks - with Caliper brake.
Chrome. M8 x 22 or 30mm long
For Carbon Road type forks - with Caliper brake.
Chrome. M8 x 22 or 30mm long
Specification
Downloads
Download File
Questions & Answers (4)
Bolt Width
By Trevor Jackson
06 Nov 2016
Hi, I Am Trying To Fit An Ultegra Brake To The Carbon Forks Of A Merida 900. The Bolt Supplied Has A Too Wide Head To Fit The Recession On The Fork. Are Your Bold Statement Narrower Than The Shimano Ones? Thank You
SJS Customer Service:
Hi,
The head on these bolts is 10mm in diameter the same as the Shimano ones so it is unlikely they'll fit any better I'm afraid.
Thanks.
The head on these bolts is 10mm in diameter the same as the Shimano ones so it is unlikely they'll fit any better I'm afraid.
Thanks.
Problem Solvers Xl Caliper Brake Mounting Bolt For Carbo
By Anonymous
04 Apr 2015
hi
I need this product in 50mm. can you please advise if this is something you stock?
regards
I need this product in 50mm. can you please advise if this is something you stock?
regards
SJS Customer Service:
Hi,
I'm afraid Problem Solvers only make this XL brake mounting bolt in 22 and 30mm lengths.
Thanks.
I'm afraid Problem Solvers only make this XL brake mounting bolt in 22 and 30mm lengths.
Thanks.
Specification
By Kevin Conn
06 Oct 2014
Thanks for that reply.
The length is fine as that is based on the thickness of the fork.
Just a bit confused still about the outer diameter that you say is 8mm. I need a thicker bolt as 8mm would move around in the fork sleeve which is 10mm.
Is M10 not 10mm ? The name implies that it is not a standard bolt as it is a "problem solver" and XL ?
Thanks !
The length is fine as that is based on the thickness of the fork.
Just a bit confused still about the outer diameter that you say is 8mm. I need a thicker bolt as 8mm would move around in the fork sleeve which is 10mm.
Is M10 not 10mm ? The name implies that it is not a standard bolt as it is a "problem solver" and XL ?
Thanks !
SJS Customer Service:
Hi,
Unfortunately the M10 is a bit misleading, M10 is 10mm but only the lip of this bolt is 10mm the main shaft is 8mm. The XL simply refers to the length as standard calliper brake bolts are a lot shorter than this.
Thanks.
Unfortunately the M10 is a bit misleading, M10 is 10mm but only the lip of this bolt is 10mm the main shaft is 8mm. The XL simply refers to the length as standard calliper brake bolts are a lot shorter than this.
Thanks.
Dimensions Please
By Kevin Conn
04 Oct 2014
Dear Team
I am refitting some Shimano Ultegra calliper brakes to the rear carbon fork on a Trek bike. The old pivot nut had seized in the frame and the Allen keyhole stripped but I managed to carefully knock it out with a long bolt.
Is the outer diameter 10 mm as that appears to be the diameter of the sleeve inside the fork ? What is the thread size on the inside: the existing thread of the brake bolt looks about 6mm.
Thanks !
I am refitting some Shimano Ultegra calliper brakes to the rear carbon fork on a Trek bike. The old pivot nut had seized in the frame and the Allen keyhole stripped but I managed to carefully knock it out with a long bolt.
Is the outer diameter 10 mm as that appears to be the diameter of the sleeve inside the fork ? What is the thread size on the inside: the existing thread of the brake bolt looks about 6mm.
Thanks !
SJS Customer Service:
Hi,
The outer diameter of this bolt is 8mm which is standard for all calliper brake bolts. the inside takes a standard m6 (6mm) bolt which is again standard for all calliper brakes. You may need to measure the length of your current bolt as it is unlikely you will need a 22/30mm long bolt for use with a rear Ultegra brake.
Thanks.
The outer diameter of this bolt is 8mm which is standard for all calliper brake bolts. the inside takes a standard m6 (6mm) bolt which is again standard for all calliper brakes. You may need to measure the length of your current bolt as it is unlikely you will need a 22/30mm long bolt for use with a rear Ultegra brake.
Thanks.