M:Part FLRB with Mounting Brackets & Hoop Low Rider
£24.99
was

Colour
£24.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
- Low rider front rack for bikes without mid-height braze ons
- Bags are held low to the ground to improve handling when heavily laden
- Suitable for 26" and 700c trekking bikes
- Supplied with full fitting kit
- Tough anodised finish to resist corrosion
- Bags are held low to the ground to improve handling when heavily laden
- Suitable for 26" and 700c trekking bikes
- Supplied with full fitting kit
- Tough anodised finish to resist corrosion
Specification
Downloads
Download File
Questions & Answers (10)
What is the max weight you carry using this rack?
By Martyn
04 Jul 2018
SJS Customer Service:
The max weight limit is 10kg.
Thanks
Thanks
I see I can't use Ortlieb bags. What front pannier bags can I use?
By David
17 May 2018
SJS Customer Service:
There are two holes in the plate that allow for some hooks to clamp around the bar in a certain fixed position. With some panniers the plate is a hindrance but this rack has been designed for lower end panniers with plain hooks that don't need to wrap around the tubing.
Thanks
Thanks
Hi, is this rack compatible with Ridgeback World Tour 2015?
By Anonymous
21 Jan 2018
My bike is in one place and I am in another, but I need to purchase the rack before I will next see my bike. Just want to be absolutely sure. Thanks!
SJS Customer Service:
Hi there,
Yes this should work, bare in mind you have got braze on rack mounts so could use a bolt on rack.
Thanks
Yes this should work, bare in mind you have got braze on rack mounts so could use a bolt on rack.
Thanks
General advice on front racks/panniers/carriers
By Matt
24 Jul 2017
I'm after a carrier and panniers for touring, to mount on solid Giant forks with drop out mounts, and threaded mounts part way up the fork. I would use Ortlieb panniers. Can you help advise me? thanks
SJS Customer Service:
Hi,
Most of the racks we stock would work with Ortlieb panniers, except these M:Part ones as they have a flat plate at the top which prevents the Ortlieb locking catches from engaging. You will need to check if your forks have a single or double mounting on the mid height for the forks.
Thanks.
Most of the racks we stock would work with Ortlieb panniers, except these M:Part ones as they have a flat plate at the top which prevents the Ortlieb locking catches from engaging. You will need to check if your forks have a single or double mounting on the mid height for the forks.
Thanks.
Mudguard Attachment
By Terry Burke
15 Jun 2017
How can the Mudguard stays be attached to this low rider rack ? ( Mpart low rider with hoop )
SJS Customer Service:
Hi,
You could either run a set of longer fixing bolts and mount them to that or you could mount a set of p-clips to the rack tubing itself.
Thanks.
You could either run a set of longer fixing bolts and mount them to that or you could mount a set of p-clips to the rack tubing itself.
Thanks.
Is This Pannier Rack Compatible With Disc Brakes On A Specialised Tricross Bike?
By Sam Richards
20 May 2017
SJS Customer Service:
Hi,
This rack was not designed with disc brakes in mind and we have never tried it on your bike so we would not be able to recommend it unfortunately.
Thanks.
This rack was not designed with disc brakes in mind and we have never tried it on your bike so we would not be able to recommend it unfortunately.
Thanks.
Would This Work On Carbon Forks
By Mick
29 Dec 2016
SJS Customer Service:
Hi,
We would not recommend this low rider for use with carbon forks I'm afraid as the top fixing needs to clamp tight and carbon forks are not designed to be clamped.
Thanks.
We would not recommend this low rider for use with carbon forks I'm afraid as the top fixing needs to clamp tight and carbon forks are not designed to be clamped.
Thanks.
By Gavin Meredith
04 Jun 2016
What is the maximum diameter fork leg that can be
accommodated. Could you also indicate max tyre width.
Regards
Gavin.
accommodated. Could you also indicate max tyre width.
Regards
Gavin.
SJS Customer Service:
Hi,
The maximum diameter of fork leg that can be accommodated is 23mm. The max tyre width for 700c wheels would be 2
The maximum diameter of fork leg that can be accommodated is 23mm. The max tyre width for 700c wheels would be 2
Pannier Fitting
By Gavin Meredith
04 Jun 2016
Could you indicate how pannier hooks fasten around the rack.Is the top plate a hinderance?
SJS Customer Service:
Hi,
There are two holes in the plate that allow for some hooks to clamp around the bar in a certain fixed position. With some panniers the plate is a hindrance but this rack has been designed for lower end panniers with plain hooks that don't need to wrap around the tubing.
Thanks.
There are two holes in the plate that allow for some hooks to clamp around the bar in a certain fixed position. With some panniers the plate is a hindrance but this rack has been designed for lower end panniers with plain hooks that don't need to wrap around the tubing.
Thanks.
Fork Compatibility?
By Steve
02 Mar 2015
Hi,
Is this part compatible with the 700c Thorn 853c Steel Fork with 46mm offset? (29594K46)
Thanks
Is this part compatible with the 700c Thorn 853c Steel Fork with 46mm offset? (29594K46)
Thanks
SJS Customer Service:
Hi
Yes, this rack will work fine with the 700c Thorn 853c forks with the 46mm offset (29594K46).
Regards, Jamie
Yes, this rack will work fine with the 700c Thorn 853c forks with the 46mm offset (29594K46).
Regards, Jamie