Call us on 01278 441500

TA Nerius 110mm BCD 5 Arm Chainring for CT-Campagnolo 11 Speed - Grey

Customer Reviews (3)
4.7 / 5| Write your review
£39.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.

- Nerius for Campag 11 speed only, can convert Campag Carbon 10 speed chainsets to 11 speed
- Can be fitted to Super Record, Record, Chorus, Athena and Centaur chainsets
- Weights: 34T = 29g to 50T = 78g
Product Reviews (3)
Questions & Answers (1) Q & A
Download File  
Product Reviews (3)
Overall Product Rating 4.7 / 5
All good so far.
By Tim
18 Jan 2020
5 / 5
I recommend this product
ProsFar cheaper than an original campag one.
This chainring went on my old chorus cranks nicely and seems to work well. Changing between the front rings seems to be as good as it was. 100 euro less than the campag one I found. Not been far on it but very hilly so lots of gear changing so a good little test.
Impressed with Quality
By D Austin
06 Dec 2017
5 / 5
I recommend this product
I have not used yet, but have fitted to a set of Record Carbon cranks using the TA chain ring bolts for Campagnolo Carbon cranks. I am impressed with quality of both the rings and the bolts.Also you can get sizes Campag don't do, such as 48 and 53 outer chain-rings. Yes, you do have to fit the chain catcher for the outer ring, but is is just a Torx.
Compatible With, Rather Than 'For' Campag, I Would Say
By Anonymous
31 May 2017
4 / 5
Consflimsy screw thing
ProsIt fits
Impossible to find a genuine 50T ring that matched my record 11 first edition, so this purchase prevented me going silver and spoiling the look. It fits and works, and I'm happy I didn't have to lose the original look or upgrade the whole chainset for the sake of a worn ring. It isn't exactly flush with the crank's spider arms - this ring's arcs are a fraction of a mm wider. Only done 100 miles so cannot comment on long term performance yet. The one annoyance that sticks out was the little stud that prevents chain jam between ring and crank. TA give a flimsy fit-it-yerself screw on thing which wouldnt tighten properly and then partly fell off on the first ride, causing me to jam on the small ring. Maybe my bad mechanical prowess but watch out for this.
Questions & Answers (1)
will this nerius chainring fit campag veloce chainset, thanks
05 May 2018
Hi there,

Yes this should fit, but be aware this is an 11spd ring and the Veloce is at current 10spd.