Call us on 01278 441500

Igro D2 Dynamo USB Power Converter

£195.99
was
Email me photo
£195.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
Power USB devices using any 2.4W and 3W STVZO compliant dynamo hub (all Shimano, SON and SP hubs) and an Igaro D2. Offering class leading efficiency, compatibility, and construction, the Igaro D2 is built in the UK to an unrivalled specification and comes with a 5 year international warranty.

Readme First!
The Igaro D2 should be placed in a location where the USB port is protected from water ingression. While the Igaro D2 is water-proof and uses the highest quality USB-C port available, water entering the USB port will cause electrolysis (corrosion) of the pins (permanent damage) and eventual failure (see FAQ).1 Without the additional measures to protect the USB port as discussed below we recommend placing the Igaro D2 inside a bag.

Regardless of where the Igaro D2 is placed there must be minimal force on the power input pins and USB port. Both were chosen for size and convenience but require a degree of mechanical sympathy. Failure to prevent undue force could result in metal fatigue, therefore always immobilise the power lead and USB lead so that they move with the main unit.

Only USB-C computer compatible cables will work with the Igaro D2. Some Qualcomm compatible chargers (typically supplied with mobile phones) only work between a Qualcomm 'fast-charge' compatible charger and USB device. If possible use a USB cable rated at 3A or 5A and as short a length as is practical.

Tips
All USB ports have a finite insertion count. A small USB extension cable will move this count outside the unit.

Consider applying a small amount of silicone sealant around the Igaro D2 USB port and USB lead. This will make the unit able to take rain from any direction. Silicone sealant is easy to remove and thick enough that it won't enter small crevices - do not use epoxy, super-glue or acrylic based sealant for this task!

Specifications
Size & Weight
- Size: 39x25x15mm
- Weight: 40g
Internals
- Efficiency (6V AC): 84.3% transfer (0.5A output), 0.007W standby draw
- Processor: 8 bit MCU, 32MHz
- Over-Voltage Protection: 100V
- Technologies: Dynamo light detection; 2x tuning network with bypass; Enhanced low speed stabilisation
Output
- Socket: Premiun USB-C with gold plated pins
- Power: 5.0V nominal -/+ 1%; 2A maximum; USB 1.2 power adapter mode
Environmental
- Splash, Water, Dust Resistance: Rated IP69 under IEC standard 60529*
- Operating Ambient Temperature: -13° to 212° F (-25° to 100° C)
- Relative Humidity: 0% to 100% non-condensing
- Operating Altidude: Infinite
- Lightning Protection: BS EN/IEC 62305-1 Class 4


*Excludes USB port. Water entering the port won't enter the unit but may damage the port.
Product Reviews (0)
Questions & Answers (0) Q & A
Specification
Downloads
Download File  
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).