Thorn J Bend Bar Ends - Black
£29.99
was
£29.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Another unique Thorn product.
Aerospace alloy 22.2mm diameter bar ends, with inward 10 degree bend and upward curved end section. J bends are manufactured with a welded alloy 22.2mm clamp specifically for straight bars.
They are particularly suited for use with Blackburn mirror (SJSC Part Number 662) - the upward curve provides an ideal and secure mounting point, which raises the mirror sufficiently to prevent it from being obscured by the rider's wrist, hands, gloves or loose clothing.
For added comfort we recommend using Grab-On Foam Bar End Racing Grip Sleeves (SJSC Part Number 24629).
Straight section is 118mm before sweeping up, total overall forward projection is 183mm, both measurements include the 40mm clamp section (all measurements approximate).
Aerospace alloy 22.2mm diameter bar ends, with inward 10 degree bend and upward curved end section. J bends are manufactured with a welded alloy 22.2mm clamp specifically for straight bars.
They are particularly suited for use with Blackburn mirror (SJSC Part Number 662) - the upward curve provides an ideal and secure mounting point, which raises the mirror sufficiently to prevent it from being obscured by the rider's wrist, hands, gloves or loose clothing.
For added comfort we recommend using Grab-On Foam Bar End Racing Grip Sleeves (SJSC Part Number 24629).
Straight section is 118mm before sweeping up, total overall forward projection is 183mm, both measurements include the 40mm clamp section (all measurements approximate).
Specification
Downloads
Download File
Related products
Blackburn Handlebar Multi Mirror fits to Handlebar End
£14.99 Inc VAT
Quick view
Thorn Stem Shim for Adapting 25.4 mm Stems to fit 22.2 mm Handlebars
£2.49 Inc VAT
Quick view
Origin8 Pro-pulsion Road Ends - Drop Bar Bar Ends - Black
£34.99 Inc VAT
Quick view
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (7)
can bar end brake levers be fit to these, and if so which ones?
By Maurice Booth
29 Jul 2021
SJS Customer Service:
Thank you for your enquiry, no sorry they will not fit.
WD 30/07/21
WD 30/07/21
What’s the width of the fitting on the handlebar please?
By Jon in Suffolk
12 Feb 2021
SJS Customer Service:
Thank you for your enquiry, it is 40mm wide
Regards WD 12/02/21
Regards WD 12/02/21
Length
By Alan Lang
25 Oct 2020
What's the length from the clamp to the bend
SJS Customer Service:
From the inside of the clamp to the start of the bend is approx 110mm
JK 27.10.20
JK 27.10.20
Install with Ergon Grips
By Kieren
19 Aug 2020
I have Ergon GP1's combined with Surly Moloko bars. I noticed your image shows these bar ends installed with similar grips. How did you slide the grips past their internal end-stop to expose enough bar to install the bar-ends? Did you file off this end-stop or was it not a feature on the pictured grips?
SJS Customer Service:
Just remove the little lip and slide on!
Thanks - 21/08/20
Thanks - 21/08/20
Can they slide onto the handlebar?
By Peter
23 Jun 2019
Hi, please, can those bar ends slide onto the handlebar to be used as "inner barends" or are they "closed" on one side? thanks, regards, Peter
SJS Customer Service:
As pictured, they slide onto the handlebar.
Thanks - 24/06/19
Thanks - 24/06/19
Is It Possible To Use Bar End Gear Controls And Drop Handlebar Brake Levers Please?
By Trevor
17 Apr 2017
SJS Customer Service:
Hi,
As these are the narrower diameter at 22.2mm you won't be able to fit drop bar brake levers I'm afraid. You will still be able to fit some bar end gear shifters though as they can normally cope with a wider range of diameters.
Thanks.
As these are the narrower diameter at 22.2mm you won't be able to fit drop bar brake levers I'm afraid. You will still be able to fit some bar end gear shifters though as they can normally cope with a wider range of diameters.
Thanks.
Weight
By Rob
13 May 2014
What is the weight of these bar ends please?
SJS Customer Service:
Hi,
These bar ends weigh 100grams each or 200grams for the pair.
Thanks.
These bar ends weigh 100grams each or 200grams for the pair.
Thanks.