Call us on 01278 441500

Hope Pro 2 EVO 6 Bolt Disc Front Hub - Silver

Customer Reviews (3)
5 / 5| Write your review
£49.99
was
Holes
£49.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
Product Reviews (3)
Questions & Answers (0) Q & A
Details
The now proven range of Pro 2 hubs have gone from strength to strength since they were launched. Countless tests, reviews and of course rider feedback have shown that the Pro 2 is everything that Hope designed it to be.

Hope have a couple of noticeable changes on the hubs now - first one is that they all now run stainless steel bearings throughout, bringing them inline with Pro 3. These mean longer life, smoother, free running and even more value for money.

With the bearing change comes a new axle. The old 15 mm axle is now replaced with a 17 mm version. This means total compatibility with Maxle and Maxle Lite (reg) 12 mm bolt through. This hub features a one piece 7075 aluminium rotor body and pawl carrier. Four pawls engage into a twenty-four tooth steel ratchet which is fixed into the hub shell and is sealed with a frictionless, non-contact labyrinth seal. The axle runs on five cartridge bearings. All Pro 2 hubs are standard 6 bolt disc compatible. The hub shell is machined from a solid billet of 2014 T6 aluminium.

Weight: 185g
Specification
Downloads
Download File  
Product Reviews (3)
Overall Product Rating 5 / 5
Typical Hope Quality
By
10 Feb 2012
5 / 5
I recommend this product
Prosmade in England,
the manufacture of this hub is excellent, the anodising is spotless, the laser engraving of the hope decals is faultless, the bearings as smooth as silk, the spoke drillings are perfection, the countersinking of the holes on both sides of the hub flanges is absolutely spot on. The DT swiss spokes I used fitted beautifully. I love the way one hub, by removing the axle ends can be quick release, maxle or what ever you are running, should you have the extra fittings available. Another British classic.
Hubs For Greenpower
By
06 Dec 2011
5 / 5
I recommend this product
Consnone
Prosquality of bearings used
I am using this type of hub for a school based competition, engineering. The hub is extremly well constructed, I am particulaly pleased by the bearings used, these will not need to be replaced like other hubs i have used in the past.
All in all great value for money. Great service from SJS also.

Disc Brake Mod
By
11 Oct 2011
5 / 5
ConsNone
ProsGreat
I am using this hub and sun rim, to put a Disc Brake on my Moulton Land Rover bike. This is a beautifully made hub and with one of their 140 floating disc on really looks the biz. One problem I did encounter, during a trail ride, even though the Skewer was tight, the wheel had a small amount of movement. This was down to the hub ends protruding through the thinner Moulton Dropouts, One of the Skewer was counterbored to sit over the hub extension, but the other end was flat and just bore on the piece coming out of the dropout. So was not holding on one side of the fork. Something to keep and eye on if you are using the same.
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).