SON Handlebar Fitting Dynamo Headlamp Bracket
£10.99
was
£10.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Fits road bars upto 25.4, also 22.2mm ATB bars with a rubber shim (supplied). Longer allen key bolt (M5 x 20mm) required to fit up to 26.2mm bars.
62mm extension, left or right hand fitting, offset forward section for headlamp with dished angle adjusting washers. Made of plastic resin, with stainless fittings.
62mm extension, left or right hand fitting, offset forward section for headlamp with dished angle adjusting washers. Made of plastic resin, with stainless fittings.
Specification
Downloads
Download File
Questions & Answers (7)
Can I use this to mount an IQ Cyo, please?
By Jeff Humm
18 Sep 2020
SJS Customer Service:
Hello, Unfortunately we do not have your light in stock- so we cannot confrim compatability. However as the IQ Cyo brakcet and the Son Edelux bracket are very similar there is a good chance that you can use this with your light.
Hope this helps,
JK 23.09.20
Hope this helps,
JK 23.09.20
What's the difference between this mount and item #33640?
By Hanna
11 Apr 2019
I'm looking for a way to fit my B&M Luxos U to 22.2mm aerobar extensions, as the fork doesn't have any mounting points. Would either of these two brackets work, and if yes, which one would be the easiest to fit and adjust?
SJS Customer Service:
Functionally and dimension wise these are identical.
Thanks - 12/04/19
Thanks - 12/04/19
Can I mount a Supernova e3 light using this bracket?
By Adam Watkins
02 Dec 2018
I read the edelux and supernova light mounting points are the same, is this true?
SJS Customer Service:
Yes, this will not be a problem.
Thanks - 03/12/18
Thanks - 03/12/18
Is There A Version Of This Bracket For 31.8Mm Bars?
By David
15 Feb 2017
SJS Customer Service:
Hi,
This bracket is only available to fit handlebars up to 25.4mm, for 31.8mm bars they produce their Milled bracket. These are SJSC part 23929.
Thanks.
This bracket is only available to fit handlebars up to 25.4mm, for 31.8mm bars they produce their Milled bracket. These are SJSC part 23929.
Thanks.
Can A B&M Lamp Luxos U Be Attached To This Bracket ?
By Sakari Isoniemi
29 Mar 2016
SJS Customer Service:
Hi,
The fittings are the same so you should easily be able to fit your Luxos U light to this bracket if you wish.
Thanks.
The fittings are the same so you should easily be able to fit your Luxos U light to this bracket if you wish.
Thanks.
Mounting Edelux2
By Michael
20 Mar 2016
Does this or the B&M version spring over the bar or does it slip on from the end?
SJS Customer Service:
Hi,
Both this and the B&M version should be able to spring over the bar for fitting.
Thanks.
Both this and the B&M version should be able to spring over the bar for fitting.
Thanks.
How Wide Does This Open?
By Anonymous
01 Sep 2014
Does this open wide enough to put on the bar without removing the bar tape?
SJS Customer Service:
Hi,
This bracket has quite a flexible mouth to it, you should be able to open it wide enough to fit without removing the tape. Just be careful though as the plastic that clamps around the bar is quite soft (allowing the mouth to open more) it means if you push it too far you could damage it quite easily.
Thanks.
This bracket has quite a flexible mouth to it, you should be able to open it wide enough to fit without removing the tape. Just be careful though as the plastic that clamps around the bar is quite soft (allowing the mouth to open more) it means if you push it too far you could damage it quite easily.
Thanks.