Supernova Multimount CRC Front Light Bracket

£29.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
- Bracket for stem with a central clamping space
- With M4 x 12mm stainless steel screws (M3 hex key) for handlebar clamp and stainless steel M5 screw set for light holder
- For 31.8mm clamping
- Polished black anodised
Product Reviews (0)
Questions & Answers (5) Q & A
Download File  
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (5)
Can I use this to mount an Edelux II to the head tube?
16 Sep 2019
I can't fit my Edelux II front light in the usual place, at the top of the forks and instead, I want to mount it a bit higher than that on the head tube. This is about 40mm in diameter. Is there a mounting bracket that will allow me to do this?
We are not currently aware of something to suit, be aware, if headtube mounted you will have poor lighting when you turn!

Thanks - 16/09/19
How wide is the mount
18 Jun 2019
I want to know if I can fit this mount in the middle of the Bontrager Elite Stem, how wide is it?
This is 16.5mm wide.
Thanks - 21/06/19
Would this work with a sinewave beacon?
14 Jun 2019
Yes these would match.

Thanks - 17/06/19
I need some piggyback spade connectors for a SON dynamo to a sinewave light .
16 Mar 2018
Please can you tell me A) if there is a cable with a piggy back spade connector that i can buy?
Or do i need to solder it myself?
If so can i buy the piggyback spade connectors from you?
Just to recap its a SON HUB to a bew SINEWAVE dybamo light.
Many thanks :)

You can't buy a cable with the piggy back connectors pre-attached but we do offer the piggy back connectors separately, these are SJSC part number 28876. They do not need to be soldered though, they just need to be crimped and then wrapped in heats shrink wrap.

Can this be used to mount a Edelux II ?
22 Aug 2017

As the mounting point shares the dimensions you should be fine to use this bracket with an Edelux II light if you wanted to.