SON Edelux II DC 6 - 75 Volt High Power LED Headlight inc. Switch & Rear Connection - Black Anodised

Question 1

is this light (overall, bracket, cable, connection, ) compatible with Brompton e-bike

By Johan Vinkx

20 May 2020

is this product
SON Edelux II DC 6 - 75 Volt High Power LED Headlight inc. Switch & Rear Connection - Black Anodised
compatible with Brompton Electric
what about connection, bracket, rear light,

SJS Customer Service: · Answer

These do not have the right connections and you cannot purchase the connectors alone, so it is pretty tough to upgrade your Brom-E!

Thanks - 28/05/20

Question 2

Does this light come with any brackets

By Paul

01 Oct 2019

I want to mount this light ideally on my handlebars as the "correct" location is far too low as it is a folding bike.
Do SON do any brackets / what bracket arrangements are available for this light please?
(As with all bike lights I've ever come across the mounting bracket is always the problem).

SJS Customer Service: · Answer

Yes, this comes with the stock SON mount - SJS Cycles part number : 23928
Handlebar - SJS Cycles part number : 9884

Thanks - 01/10/19

Question 3

Which version of Edelux II DC is this one

By Rémi GUYOMARCH

21 Oct 2018

The image displayed here is either mfr#680012 or mfr#681412 (6V to 8V input, as shown)
Can you confirm you sell mfr#681413 (6V to 75V, as written)

SJS Customer Service: · Answer

We can confirm this is the 6-75v light.

Thanks - 23/10/18

Question 4

Which rear light can be connected to this front light

By Rémi GUYOMARCH

19 Oct 2018

Hi,
Which rear light can I connect to this DC version of Edelux II, does the SON rear light (SJS#37756) or B&M Toplight View Brake Plus (SJS#34367) fits

SJS Customer Service: · Answer

Any of the SON rear lights would be most suitable.

Thanks - 23/10/18

Question 5

Son Edelux Ii

By emiel timmermans

18 Aug 2016

hi witch Schmidt Edelux II DC High Power LED Headlight do i need for a brompton, i have a son hub and backlight that is connected to the front light
regards

SJS Customer Service: · Answer

Hi,

The DC hub is not the correct one for use with a dynamo hub. The correct model in black you need is SJSC part 33360. You'll need the 36cm cable option for use on your Brompton.

Thanks.

Question 6

Can This Be Hooked Up To Li Ion Without Voltage Adjustment?

By Anonymous

19 Jan 2016

I have a li ion pack with 4 batteries. The voltage is a little over 7 volts. Do I have to do anything to the voltage or can the batteries be hooked directly up to the Edelux or Edelux II?

SJS Customer Service: · Answer

Hi,

If you use the Edelux II DC light, then you should be able to connect it straight up to those batteries.

Thanks.

Question 7

Which Version Edelux 2 Dc Do You Have?

By Mike

06 Jan 2016

I am interested in the Edelux 2 DC for electric bikes. I need the 6 to 75v version.

The picture you have is for the 6 to 8v version but the text description is for the 6 to 75v version. Which is correct?

SJS Customer Service: · Answer

Hi,

The description is definitely correct, the picture is the same one used across all of the different models rather than being specific to each version. This means this light is definitely the 6-75V version.

Thanks.

Question 8

What Connections Does The Edelux 2 Dc Have?

By Mike

06 Jan 2016

Hi,

I need to know what connections this has to connect to my battery.

Regards
Mike

SJS Customer Service: · Answer

Hi,

The end of the cable which would attach to the battery come as a bare end allowing you to fit whatever connection is required for your specific battery.

Thanks.

Question 9

Do You Sell Replacement Bulbs For The Edelux 2

By Bob Zeller

17 Dec 2014

Do you have any idea as to the amount of hours one could expect from the bulb? And do you sell replacements. I have Edelux 2 and a B&M Secula lights mounted on my Canadian made Mariposa and have been leaving both on all the time. Can you supply bulbs as I need them?

Many thanks

SJS Customer Service: · Answer

Hi,

The Edelux 2 lights use LED bulbs so the bulbs are not individually replaceable. These lights can be used for a number of years without failure and if they ever do they can be sent back to Schmidt for servicing.

Thanks.