Busch & Muller D Toplight Plus Rear Dynamo Light with Standlight for Carrier
£25.99
was
£25.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
50 mm or 80 mm Bolt Centres
Excludes cable. Uses 1 super bright LED. The lamp is extremely bright even at low speeds. Automatic electronic standlight which stays lit for 4 minutes. NO batteries required. Anticorrosive, very durable. (May need adapting to fit certain racks) Lens 120 x 50mm.
Excludes cable. Uses 1 super bright LED. The lamp is extremely bright even at low speeds. Automatic electronic standlight which stays lit for 4 minutes. NO batteries required. Anticorrosive, very durable. (May need adapting to fit certain racks) Lens 120 x 50mm.
Specification
Downloads
Download File
Related products
Wurth Cable Connector Red Insulated 2.8mm x 0.5mm Female x 1 - Fits B+M Dynamos & Lights
£0.25 Inc VAT
Quick view
Product Reviews (4)
Overall Product Rating 4.8 / 5
recommended
By Anonymous
10 Jun 2020
5 / 5
I recommend this product
Consno flashing option
Proswell constructed, durable, large reflector
just replaced my old one with a new one after 10 years daily use in all weathers. Still in good condition apart from damage from hard knocks.
Excellent rear light
By Geoffrey Whittington
13 Jan 2018
5 / 5
I recommend this product
I have used this model of lamp on my commuter bike for six years and it is thoroughly reliable. It seems to fit on most carriers.
Busch & Muller D Toplight
By Anonymous
20 Mar 2011
4 / 5
I recommend this product
Have used the same rear light on an existing bike for some years with no problems, connected to a dynamo hub front wheel.
Wanted to fit another unit to my new bike.
Again, excellent service from SJS Cycles. Thank you.
Wanted to fit another unit to my new bike.
Again, excellent service from SJS Cycles. Thank you.
Led Rear Light For Dynamos
By Eetu Pajala
24 Oct 2010
5 / 5
ConsNone
ProsLED, good connections, easy to install
I paired this light with a SJS part #15244, works superbly but neither of the lights came with wires with connectors to fit the front light. The rear light has an option to connect wires with a screw which works well. Only tool you will need is a philips head screw driver. Screw holes are closed, but they will pop out simply with the tip of the screw driver. One LED light.
Questions & Answers (5)
Is it possible to connect this to my Schmidt E6 halogen front light?
By Andy Watt
07 Oct 2019
SJS Customer Service:
Hi there,
Unfortunately, as we have no experience in doing this we cannot say for certain I'm afraid.
Thanks.
Unfortunately, as we have no experience in doing this we cannot say for certain I'm afraid.
Thanks.
Can I use this in place of the front light supplied with a Bafang Mid-Drive motor?
By Robert Nolan
04 Aug 2019
I already have a Son Dynohub & Light, so would the current be compatible?
SJS Customer Service:
No, you need an e-bike light like SON Edelux II DC High Power LED Headlight inc. Switch & Rear Connection - Silver Anodised (our part # 35782L140) - which is for 6 to 75 volts for Electric bikes with DC supply only. Not suitable for use with dynamos
Can this light use a separate battery pack?
By Mark
08 Oct 2017
Would it be possible to power this light by external battery? I know that one version uses both dynamo and internal batteries. As the rear light is powered through the front light on a dynamo set up what would the input voltage be?
SJS Customer Service:
Hi,
This light can only be used with Dynamos. Most batteries give out DC current, whereas B&M rear dynamo lights require an AC input.
Thanks.
This light can only be used with Dynamos. Most batteries give out DC current, whereas B&M rear dynamo lights require an AC input.
Thanks.
Will This Light Fit A Brompton Rear Rack?
By Ben
18 Sep 2016
No review
SJS Customer Service:
Hi,
When used with the 50mm bolt spacing option this light will fit fine onto a Brompton rear rack.
Thanks.
When used with the 50mm bolt spacing option this light will fit fine onto a Brompton rear rack.
Thanks.
What Cable Do I Need
By Cathryn Symons
02 Sep 2014
This doesn't include a cable.
How do I connect it to my dynamo? what cable do I need?
Thanks
Cathryn
How do I connect it to my dynamo? what cable do I need?
Thanks
Cathryn
SJS Customer Service:
Hi,
You can't attach this directly to your dynamo, rear lights have to be piggy backed off of front lights. There are two cable that can be used to connect a front light to the rear, a basic cheap cable is SJSC part number 25542, a much better cable with overvoltage protection is Schmidt's which is SJSC part number 15905.
Thanks.
You can't attach this directly to your dynamo, rear lights have to be piggy backed off of front lights. There are two cable that can be used to connect a front light to the rear, a basic cheap cable is SJSC part number 25542, a much better cable with overvoltage protection is Schmidt's which is SJSC part number 15905.
Thanks.