Busch & Muller Lumotec IQ2 Eyc E 50 Lux E-Bike Headlight

Please Note: For E-Bike use only

The new Lumotec IQ2 Eyc E-Bike light from Busch & Muller incorporates all of the best features of the dynamo model but is designed to work with most E-Bike systems currently on the market. It can be connected to all DC power sources supplying between 6 and 42V DC. The 50 lux output with Close Range Light creates a far reaching, wide and evenly lit beam pattern ideal for faster moving E-Bikes. The Eyc is switchless. This means that it is always turned on or is switchable via the E-Bike console.

The Eyc E has an inbuilt converter that generates a 6V DC output designed to work with specially designed E-Bike rear lights from B&M. It is possible to run standard rear dynamo lights with the Eyc E, however please note that the stand light function will remain on after the E-Bike system is turned off.

The Eyc can be used with Bosch & STEPS systems. Please note that on some of these systems the rear lights will be connected via cables directly from the battery. In these cases the rear wires/spades on the Eyc system must be isolated.

The Eyc can be used in conjunction with the Yamaha systems which produce 500mA. However, it is not always possible to run a rear light as well due to the lower power output of the Yamaha system.

- Can be connected to all DC power sources supplying between 6 and 42V DC, i.e. most E-Bike systems currently available
- 50 Lux output
- Switchless - controlled via the E-Bike console
- Incorporates a converter that generates a 6V DC output intended to supply the E-Bike rear lights
- Regular rear dynamo lights can be used with this front E-Bike light
- Supplied with a clip on reflector
- Supplied with a twin cable which is hard wired into the light ready to be attached to the battery
- Can be used with all Bosch & STEPS systems
- Cannot be dynamo driven