Call us on 01278 441500

Zefal HPX Vintage Frame Pump

Customer Reviews (7)
4.1 / 5| Write your review
£19.99
was
Size / Colour
£19.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
Product Reviews (7)
Questions & Answers (7) Q & A
Details
The Zefal name is synonymous with the HPX Vintage frame pump. Durable all aluminium construction, available in 4 sizes with the HPX spring locking ensures it's capable of pumping up to 160 PSI.

- Size 1 = Compressed length 35cm. Uncompressed length 41cm
- Size 2 = Compressed length 41cm. Uncompressed length 46cm
- Size 3 = Compressed length 46cm. Uncompressed length 51cm
- Size 4 = Compressed length 51cm. Uncompressed length 57cm
Specification
Downloads
Download File  
Product Reviews (7)
Overall Product Rating 4.1 / 5
Watch That Locking Lever, It Can Catch In Trousers
By
29 Jan 2016
3 / 5
ConsLock lever can snag
ProsAffordable, effective, range of sizes
I've owned many of the Zefal HPX, and normally cycle in shorts or tights, no problems. In the past two days I have been cycling in jeans, and on both days the jeans got snagged on the locking lever. The pump gets pulled off, bits break, and I have now lost 2 pumps. This can happen if: the pump is on the downtube, and the lock lever is on the non drive side, which is where all the photos show it.
King Of Pumps?
By
25 Apr 2013
5 / 5
I recommend this product
ConsNone
ProsEase of use, build quality, value for money
The feeble skills of CO2 and mini pumps are no match for the power of the Zefal HPX pump. If you have a frame that can accommodate a pump like this get it!
Reliable Pump
By
12 Mar 2013
5 / 5
I recommend this product
ConsWeight
ProsReliable, effective
Even the smaller sizes of this pump are far better than any mini pimp I've used. Be prepared to lend it to your club mates when they get a p******e or you'll end up using it a lot more than you think. A spares kit can be obtained for the rubber innards and threaded cap that holds them in. Useful if you should lose the cap or the rubbers wear out.
Zefal Hpx Pump
By
15 Aug 2012
4 / 5
I recommend this product
ProsEfficient,quality pump
An excellent pump, which fits the frame well with no rattles.
Care does need to be taken with the sizing!.
Why would anybody bother with those supid and ineffective mini
pumps?.
Excellent
By
27 Jun 2012
5 / 5
I recommend this product
ProsEfficient, quiet on frame
Very efficient. Easily achieves 100psi.
Fits well no rattles.
Reasonably priced. Take care with the size.
Review Of Zefal Hpx Punp
By
20 Jan 2012
4 / 5
I recommend this product
Consnone
Prosgood value for money.
Although not quite what I expected the pump fitted the bike well and did a very good job on inflating my tyres.
Good value
By
27 May 2010
3 / 5
A robust pump with traditional looks that is intended to fit along side the seat tube. However with a suitable pump peg it fits snugly under the top tube. NB The sizes quoted are traditional frame sizes - seat tube length - and not pump sizes. Each pump is actually 2 or 3 inches smaller than the quoted size.
May 2010
Questions & Answers (7)
Will Size 4 Be Available Again (Pulldown Only Lists Sizes 1 To 3)?
By
06 Jan 2016
SJS Customer Service:
Hi,

I'm afraid the HPX Vintage pumps have now been discontinued so we will not be getting any more in that size in this "vintage" colour way. We can however offer the black version in the same size that you require (size 4), this is SJSC part number 37684 and is the same price.

Thanks.
I Am Looking For A Pump That Fits Along The Seat Tube
By
22 Jun 2015
Pump needs to be frame fitting on the bottom and fitting into a brazed on pump peg at the top. Measurement between bottom tube and peg is 51cm so size 4 looks ok. Is the Zefal HPX Vintage Frame Pump ok for this.
SJS Customer Service:
Hi,

This Zefal HPX pump will be suitable for your bike as it is designed to be fitted with only a single pump peg.

Thanks.
Audax Mk3 Frame Pump
By
20 Mar 2015
I have an Audax Mk3 size 550 frame with pump pegs on the rear stay. Is the HPX the right pump to fit it?
SJS Customer Service:
Hi,

The HPX vintage is the pump we usually fit and recommend so it should be suitable for your needs.

Thanks.
Does The Top End Have A Hole In For A Pump Pea?
By
09 Sep 2014
I'm looking for a pump to fit under the top tube with a pump pea braze on.
SJS Customer Service:
Hi,

There is a hole in the bottom to accept a Pump peg, the top has two extensions at different angles contoured to fit the shape of a frame.

Thanks.
Can I Return A Pump Its Too Long
By
09 Aug 2014
Recently purchased a Zefal Classic pump from SJS but it appears I have ordered the wrong size am I able to exchange this for the Size 3 version?
SJS Customer Service:
Hi, Yes you can, if you contact our Customer Service Team on customerservice@sjscycles.com with your details they will then send you a Returns Form to send the pump back to us. Regards Jamie
Can I Fit This Pump Under The Top Tube?
By
08 Nov 2013
The top tube is 53.4 cm or 21 inches. Would a size 4 be the correct fit?

SJS Customer Service:
Hi,

Yes size 4 would be the correct fit for your frame.

Thanks.
Zefal Hpx Frame Pump Size
By
30 Oct 2013
The measurement of the seat tube from top to bottom [inside measurements] is 47 cm.....which size pump should i get?....My guess is size 3......please advise....cheers.....Leon
SJS Customer Service:
Hi,

Yes you will need a sixe 3.

Thanks.