Call us on 01278 441500

Ryde Andra 30 26", 559 MTB CSS Rim - Regular Drilling - Black - 36 Hole

£59.99
was
£59.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
Product Reviews (0)
Questions & Answers (12) Q & A
Details
Ultra hard wearing Carbide Super Sonic brake surface, allowing fantastic braking and wear characteristics. The carbide is projected at seven times the speed of sound on to the rim imbedding it into the alloy. Unlike a ceramic surface it cannot flake away as it is part of the rim (not a layer). Rim overall width of 24mm & inner well width 19mm.

The only recommended brake blocks are Swisstop C.S.S. Blue V brake blocks (SJSC part # 32142).

Manufacturer Details:
- ETRTO compatability size: 559 x 19
- Sides: CSS
- Eyelets: -
- Valve hole diameter: 6.5 mm
- Recommended tyre widths: 28 to 62 mm
- Weight 735g
- ERD - 541
Specification
Downloads
Download File  
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (12)
Can I get Andra 35's or 40's with the CSS treatment ?
By
30 May 2019
Trying to build up a set of 36 hole Andra 40's with the CSS coating but can't seem to find them anywhere. Does Ryde only make the CSS rims in the Andra 30 size ? Does Ryde still do the CSS treatment at all ? Thanks
Hi there,

Unfortunately, we do not stock that rim with the CSS coating. We have different models from Ryde that are CSS but unfortunately not that one.

Thanks.
Can I use this with my 36 hole Rohloff hub or do I need one with the Rohloff drilling?
By
20 Apr 2019
You can, Rohloff drilling is not available in 36 hole, with a Rohloff hub you MUST follow the previously used lacing pattern, IF we were to rebuild the wheel for you our wheelbuilder would CONVERT the rim for better use with Rohloff, if you don't there is a RISK of spoke failure @ the nipple, regards Robin
My wheelbuilder will be using 12g spokes with a 5mm nipple. Will the 5mm nipple fit this rim?
By
15 Apr 2019
My wheelbuilder will be using 12g spokes with a 5mm nipple. Will the 5mm nipple fit this rim? Thanks
Hi there,

You should be able to use those without an issue, however, as we have never done this we cannot say for certain.

Thanks.
Is the 36h 559 Rigida Andra 30 w/ Rohloff drilling in stock?
By
09 Apr 2018
Is the 36h 559 Rigida Andra 30 w/ Rohloff drilling in stock? With the CSS carbide coating.

If not, can you give me a link to a site where I can order it?

Thanks mate,
Jaime
Hi there,

We only stock the 32h versions for use with Rohloff hubs, for more information or to order please contact our sales team.

Thanks
Normal drilling use with rolhoff?
By
08 Apr 2018
Hi, I ordered the Andra 30 (26" with 36h) for use with a rolhoff speedhub. I accidentally ordered one without the Rohloff specific drilling. Can I use this wheel with the Rohloff (e.g., will the spokes break quicker), or is it the exact same?
Hi there,

We would always recommend the Rohloff drilling as it leaves the spokes with less stress that ultimately can cause them to fail.

Thanks
Why does the ERD listed here differ from that of the Ryde website (541 vs. 535)?
By
05 Jan 2018
Hi there,

The sized listed on the site is measured by ourselves, therefore we know it is 100% correct.

Thanks
is this rim intended to be used with the Rohloff hub?
By
08 Nov 2017
Hi,

Assuming your hub is 36h as well then this rim would be fine for use with a Rohloff as with 36h builds it does not require an a specific rim for larger hubs.

Thanks.
Minimum/maximum tyre width
By
26 Sep 2017
What are the minimum and maximum tyre widths that this rim will take? What would you recommend for medium weight road touring if you were supplying? Thanks
Hi,

This rim can accept tyres sized between 28mm and 62mm wide. For any touring use we would always recommend one of the tyres in the Schwalbe Marathon range, there are options for different terrain and work loads.

Thanks.
Hi, Can This Rim Be Used With A Disc Brake ?
By
07 Apr 2015
And laced to a Deore XT 6 Bolt hub FH M756A 36 hole
rear cassette hub ?
What sort of lacing pattern would you recommend ?
Hi,

Although you could use this rim with a disc brake hub we would not recommend it, the CSS is just a coating on the rim for when its being used with rim brakes. This version of the rim is no stronger than the standard version, for use with disc brakes we'd recommend the non-CSS version of the rim.

Thanks.
Compatible With Shimano Doer Xt Fh780 36H
By
25 Mar 2015
HI !! is Rigida Andra 30 26" , 559 MTB CSS Rim Black 36 Hole Regular Drilling compatible with xt fh_t780 36h and what is the size for spokes ?thank you
Hi,

This hub is indeed compatible with this rim. When we've built up these hubs into these rims before we've used 260mm spokes on the drive side and 261mm on the non-drive side.

Thanks.
Can This Rim Support A 190Kg Rider?
By
10 Dec 2014
I purchased this rim in 36h from here and have a White Industries MI6 rear 36h hub, 12mm x 142mm thru axle, and plan to get a high quality professional build of the wheel with the strongest spokes available. I weigh 190kg and want to lose weight by riding but need a very strong rear wheel obviously. I understand that this rim is used for tandems and ebikes too, which is encouraging.
Hi,

This rim is one of the strongest and most robust rims available currently, we regularly fit them to tandems and our heavy duty touring bikes so they should be perfectly suitable for your needs. When built well and with 36 spokes it will create a very strong wheel, that should easily be able to support your weight.

Thanks.
Is This Rim Able To Take A Schrader Valve Please?
By
11 Dec 2013
If not are you able to get hold of them with a schrader valve hole? Thanks :)
Hi,

This rim has been designed to be used with a Presta valves, they aren't available separately with Schrader drilling as such but they can be drilled out to a larger size to accommodate the Schrader valves.

Thanks.