26 559 Wheelset 36h Ryde Andra 30 Rims with Shimano Deore Hubs in Black

Hi, yes that is correct. Thanks 05/03/2020

The Andra 30 rims in CSS are available but we only have 32h.

We would happily build a 32h pair with Deore T610 hubs and be confident in their strength.

Simply add the hubs, rims and wheel build options to your basket and check out!

12859 X2
38972H32 / 32266K32
4595S32 X2

Thanks - 02/12/19

Yes of course! Just email [email protected] with your spec and we can get that sorted.

Thanks - 23/04/19

We would use SJS Cycles part number : 23180BLK36 with the Deore T610 hubs, custom build option depending on your spoke choice. If you wanted CCS you would be lead to use SJS Cycles part number : 18886H32.

Thanks - 08/03/19

As per the description -
DT Champion Stainless spokes.
Front: 262mm
Rear: 260/261
Both built with 14mm nipples

Thanks - 03/12/18

Yes - SJS Cycles part number : 34970

Thanks

Hi,

Generally an eyelet will spread the load better causing less stress to a particular spot on the rim - however, with the Andra rims, they are so strong and well made, as well as being built correctly into a quality wheel with a good selection of spoke count for the application, I would not have any worries about rim failure.

Thanks

Hi,

The front uses the 262mm and the rear uses 260/261mm.

Thanks.

Hello,

These rims are not eyletted.

Thanks.

Hi,

These wheels come with the standard rims with plain alloy sidewalls. We would have to do a custom build for these wheels with the CSS rims.

Thanks.

Hi, The rims are drilled for Presta valves, 6.5mm.

Hi,

This is one of the pre-built options we offer so wouldn't be able to change it, but we could do a custom build with the XT hubs if you liked. To do this all you need to do is add the hubs, rims and two of our wheel build options to your basket and we'll send you fully built wheels.

Thanks.

Hi,

These are the standard Deore hubs and not the Deore XT hubs unfortunately.

Thanks.

Hello.

As the rim inside well is 19mm the closest we do is 20mm rim tape.

Thanks.

Hi,

The Andra rims are recommended for use with tyres up to 2.3

Hi,

The rear hub is indeed 135mm OLD. Although these wheels are not officially rated for tandem use they are the strongest full wheelset we stock so would be more than suitable for use on your tandem.

Thanks.

Hi,

The hubs in these wheels are non-disc hubs so these wheels are not suitable for use with disc brakes I'm afraid.

Thanks.

Hi,

These wheels are indeed suitable for use with V-brakes.

Thanks.

Hi,

This wheelset would be our top recommendation for a heavy duty long lasting 26" wheelset. They will be stronger than anything else we do and should prove very reliable, their only downside being they're not very light.

Thanks.

Hi,

These are a pre-built wheelset we have already built, if you wanted the same rims and hubs but built with double butted spokes we would have to do a custom wheel build. A custom wheel build is more expensive and so are the double butted spokes. To order a custom wheel build just add the hubs, rims and one of the appropriate "wheel build" options from the website into your basket and we will build it and send you a whole wheel.

Thanks.

Hi,

The spokes used on this wheelset are DT Swiss Champion plain gauge spokes. This means they are 2mm or 14 gauge across their entire length.

Thanks.

Hi,

The 36H in the title and the description refers to the number of spoke holes in the rim (this obviously corresponds with the number of spokes holes in the hub and the number of actual spokes). Both of these wheels have 36 spokes in them.

Thanks.

Hi,

Yes the hub on the rear wheel can accept a 10spd cassette as well as a 9/8spd or even a 7spd cassette with a spacer.

Thanks.