Rear Brake Hanger Seatbolt Fitting
£2.99
was
£2.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
Seat Binder Cable Hanger for optimal cantilever brake cable routing. Mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop.
- Mounts to most seat binder bolts
- Alloy construction
- Great for cantilever brake
- Mounts to most seat binder bolts
- Alloy construction
- Great for cantilever brake
Specification
Downloads
Download File
Questions & Answers (3)
What is the length please?
By Sally Thompson
22 Apr 2021
It would be good to know the length from the centre of the bolt hole to the top of the cable hole. Thanks.
SJS Customer Service:
Thank you for your enquiry, it is 27mm
WD 22/04/21
WD 22/04/21
Hi, could you tell me the thickness (mm) of the brake hanger? Thanks.
By Anonymous
26 Feb 2018
SJS Customer Service:
Hi there,
The section that fits onto the seatclamp binder bolt is 2.6mm thick.
Thanks
The section that fits onto the seatclamp binder bolt is 2.6mm thick.
Thanks
What Size Seatpost Binder Bolt Is It For?
By Simon Harris
01 Sep 2016
Also, it doesn't have an angle adjustor mechanism like the dia-compe version, nor a tab/flat like the old Mafac type that held the angle relative to the binder bolt. So what stops it rotating on the centre of the binder bolt when the brake is applied?
SJS Customer Service:
Hi,
This brake hanger is designed to fit bolts up to 6mm in diameter. If fitted correctly there should not be any rotation anyway, but in reality there is nothing preventing it from rotating.
Thanks.
This brake hanger is designed to fit bolts up to 6mm in diameter. If fitted correctly there should not be any rotation anyway, but in reality there is nothing preventing it from rotating.
Thanks.