Busch & Muller Light Bracket for Fork Crown - 23mm Mount

I recommend this product

Wanted to put front lights on with a handlebar bag in place and this did the job. Would be nice if it came with the long bolt you need but I found one in my "Bolt Box". Like the rubber cushioning on it as saves any damage to frame, does mean you cannot tighten it to rigid but really unless your front light is made of lead you should be OK. Mine is a Hope so not light!

I recommend this product

With fitting a handlebar bag the 'new traditional' way of fitting a front light on the handlbars doesn't work. I therefore thought that perhaps the 'old traditional' way of fitting a light from the top of the forks (through the hole where the mudguard goes) would work - and it does! This is a very study bracket and gives just the right throw to work well

I recommend this product

Simple to fit to my disc braked bike. Sturdy enough for a Serfas elume 1500.

this is a great bracket but as Simon King above said BBB sell the same one for half this price.
it didn't fit my Sherpa straight off. i needed to make up a seperate bracket for it to allow it to sit in front of the fork bearings.
one other slight disadvantage was that it does make the light wobble a bit if using a larger heavier light but this may be due to the adapter bracket i had to use.

I recommend this product

Really good bracket. May need a little adapting but is great.

I recommend this product

This bracket works well with the twin plate forks of my Raven Tour (and no dounbt many others). The bracket overcomes the tourists problems associated with light location and the use of a front bag. Would support quite a hevy light over fairly bumpy (but possibly not offroad) terrain''

I haven't managed to get this to fit with either of our pikes with v or canti brakes. Even if I do manage it by cutting the rubber spacer or some other adjustment, I don't think the space round the bracket cylinder will enable a smart light to shine at the right angle.
Overall I'm disappointed and regard this as a waste of money.
Surprised B&M make it and that SJSC stock it.

This is identical (except for the logo) to this item:

BBB UniMount Bracket

which is a fraction of the price. So buy that one instead!

I recommend this product

Bought this after searching high and low for a bracket that would accomodate my new front light. I have a GT bike with tapering handlebars and I couldnt get the light sat correctly so
A- It stayed still and
B- It shone in the right direction.
This littlepiece of engineering cleverness solved that problem, after a bit of tweaking that is, I have it fitted to my crown, due to the design of this crown i had to cut a bit of the bracket so it would fit snug. Once i had modified it it holds the light in a good position that gives an extra coverage of light due to it being a foot or so closer to the road.
Good service by SJS backed up with a quic delivery.