S and S Machine 10" Edge Pull Hard Bike Case - Grey
£599.99
was
£599.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
A top quality case, perfect for transporting most “naked” S+S coupled bikes.
PLEASE NOTE It can be very difficult and sometimes impossible, to fit the mudguards and carriers, from a fully equipped touring bike, into the case. Some forks may also require the steerers to be shortened & some Thorn models such as the Nomad can not be made to fit.
This case offers the safest means of transporting your bike, especially if you're flying and you may therefore decide, if you have sufficient baggage allowance, that the time taken to disassemble and re assemble your bike sufficiently, to fit into this case, is worthwhile.
Dimensions: 26 x 26 x 10 inches (66 x 66 x 25.4 cm)
Weight: 7.61Kg (16.74lb)
PLEASE NOTE It can be very difficult and sometimes impossible, to fit the mudguards and carriers, from a fully equipped touring bike, into the case. Some forks may also require the steerers to be shortened & some Thorn models such as the Nomad can not be made to fit.
This case offers the safest means of transporting your bike, especially if you're flying and you may therefore decide, if you have sufficient baggage allowance, that the time taken to disassemble and re assemble your bike sufficiently, to fit into this case, is worthwhile.
Dimensions: 26 x 26 x 10 inches (66 x 66 x 25.4 cm)
Weight: 7.61Kg (16.74lb)
Specification
Downloads
Download File
Questions & Answers (4)
Does it come with anti-compression members
By Matyas
16 Jun 2021
Hi
Does the bag come with anti-compression members or net or just the bag itself without anything in the inside
Thank you
Does the bag come with anti-compression members or net or just the bag itself without anything in the inside
Thank you
SJS Customer Service:
Thank you for your enquiry, it is just the case
650B wheels
By Sam
27 May 2021
Just wondering if you know / think 650b x 50mm would fit without removing the tyre? Had thought to go tubeless so would be quite a mess if I had to remove the tyres, not to mention a bit of a faff the other end! Thanks as ever
SJS Customer Service:
Hard to say as different tyres have different inflation profiles. You could just deflate them to pack- but I suggest bagging the wheels to prevent sealant leaking!
JK 28.05.21
JK 28.05.21
Will My Bike Fit?
By Emrys Jones
20 Nov 2016
I have a std 57cm Bob Jackson road bike, 700c wheels. If I get BJ's to split the frame with S&S couplings, will the bike fit in this box? Or perhaps, why won't it fit in this box?
SJS Customer Service:
Hi,
This box was designed with S+S' own bikes in mind, it is highly possible that your bike will fit but without testing we unfortunately have no way of knowing for definite.
Thanks.
This box was designed with S+S' own bikes in mind, it is highly possible that your bike will fit but without testing we unfortunately have no way of knowing for definite.
Thanks.
Do 26Inch Wheels Also Fit Into This Box?
By Kelly
06 Nov 2016
with / without the tubes connected?
SJS Customer Service:
Hi,
A set of 26" wheels will be able to fit into this box, you should be able to leave the tyres fitted but you'll most likely need to deflate them to fit them in.
Thanks.
A set of 26" wheels will be able to fit into this box, you should be able to leave the tyres fitted but you'll most likely need to deflate them to fit them in.
Thanks.