Call us on 01278 441500

Thorn Accessory Bar MK2 T Shaped 105 mm Extension - 25.4 mm - 0 Deg

£19.99
was
Details
Product Reviews (0)
Questions & Answers (3) Q & A
Details
Mounts to 1 1/8 inch steerer tube for lights, computers etc. A really useful T-shaped bar for lights and computers when handlebar space is at a premium. It takes up the space of a 1 1/8 inch headset spacer on the fork steerer tube (27mm deep clamp). Single clamp allen key bolt at rear, hard black finish.

Dimensions:
- Forward Extension: 105mm (22mm diameter)
- Straight Section Width: 150mm (25.4mm diameter)

Ortlieb have changed the Q/R fitting for their bar bags. . . This is how the cable should be fitted with our accessory bar. . . Wrap several times around the stem and pull the free end really tight before locking down the Allen screw which secure the cable. Tighten the Allen screw at the front of the Q/R and lock down the other screw once you are happy with the angle of the bag on the bike.
Specification
Downloads
Download File  
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (3)
What'S The Height Of The Steerer Tube Section?
By
21 Jun 2016
Hi, I have limited space available on the steerer tube (2 x 10 mm spacer) and I'm wondering whether the extension bar clamp will fit
SJS Customer Service:
Hi,

The clamp is 27mm deep so will be too large to replace just your two 10mm spacers I'm afraid.

Thanks.
Thorn Accessory Bar Mk2 T Shaped 105 Mm Extension - 25.4 Mm - 0 Deg
By
13 May 2016
I am looking to add an extra bar to my stem to attach my Ortlieb Ultimate Handlebar bag so that I can free up space on my handlebar for lights and phone mount. I would like the bar to sit lower so that my light can shine over the handlebar bag. Would the Thorn Accessory Bar MKS T work for this application?
SJS Customer Service:
Hi,

This MK2 T bar was designed almost entirely for that purpose so should work for exactly what you're trying to achieve.

Thanks.
Advantage Of 25.4 Diameter Compared To 22.2 Mm
By
08 May 2015
I'm trying to decide which to order. This will be used to mount an Ortlieb handlebar bag using a Rixen Kaul Klickfix mount.
SJS Customer Service:
Hi,

For mounting a handlebar bag bracket we would recommend going with the 25.4mm size as it will allow for a better fitting. The 22.2mm size was release mainly to allow the fitting of a gear shifter to it.

Thanks.