Call us on 01278 441500

Thorn Saddlebag Bracket 172.5 mm Extension 22.2mm - 45 Deg

Customer Reviews (1)
5 / 5| Write your review
Product Reviews (1)
Questions & Answers (1) Q & A
Whilst extremely tall cyclists, with very high handlebars, may be able to use this 45 degree accessory bar in an inverted position on their 1?" fork steerers (Replaces a few headset spacers); its intended use is at the rear of the bike, as a support for Brooks saddle bags.
Cyclists with legs longer than 31" using 26"wheels (or longer than 32" with 700 wheels) will find that this accessory bar provides attachment points at the correct height for the leather straps of the Brooks bag. This bar allows the use of a saddlebag on bikes without saddles which have bag loops. This accessory bar does not cut through the leather straps as bag loops tend to do.
The holes which are provided allow M5 screws to be inserted, which will prevent the straps from sliding off.
We used 2 M5 x 30mm stainless bolts, 4 washers, 2 on each bolt and 2 dome nuts. You will need to put a M5 drill through the holes to make hole throught the end plug for the bolt.
The 45 degree accessory bar has a 28.6 to 27.2mm shim included, which allows the potential of fitting to every Thorn bike ever made.
Download File  
Product Reviews (1)
Overall Product Rating 5 / 5
T Bar Extension Used On Cyclocross Frame
07 Apr 2012
5 / 5
I recommend this product
ProsGreat Bag-hanger, easy installation
I have a Jamis Supernova which has a Ritchey Carbon Fork. The fork has no eyelets or holes just cantilever brake studs. I am using this to mount an Arkle Handlebar bag for training rides on pavement. This places the bag considerably lower than a handlebar mounting and that makes possible the use of aerobars as the 45 degrees down is excellent.

Very easy to install.
Questions & Answers (1)
14 Mar 2016
How tall is the stack height please?
SJS Customer Service:

The stack height is 40mm.