Madison Summit Alloy Rear Cycle Pannier Rack
£34.99
was
Colour
£34.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
A pannier rack built to perform and last, packed full of features and attention to detail
Robust 10 mm tubular alloy TIG welded construction
Narrow top and wide base design offering the ultimate triangulation stability unmatched by other designs
Dual rail fitting system allows pannier bags to be fitted lower down for a lower centre of gravity, and additional bags can be mounted on the top
Multi-mount fitting system allows the rack to be fitted to a wide variety of frame designs
Bolt on foot design dramatically increases strength and lifespan
Additional longer foot pack included for a true universal fit
Built in cargo strap mount on the foot plates
Max load carrying capacity 30 kg
No-quibble 5 year warranty
Weight including fittings: 760g
Note - This Product is not designed to pull a trailer or attachment of child seats.
Robust 10 mm tubular alloy TIG welded construction
Narrow top and wide base design offering the ultimate triangulation stability unmatched by other designs
Dual rail fitting system allows pannier bags to be fitted lower down for a lower centre of gravity, and additional bags can be mounted on the top
Multi-mount fitting system allows the rack to be fitted to a wide variety of frame designs
Bolt on foot design dramatically increases strength and lifespan
Additional longer foot pack included for a true universal fit
Built in cargo strap mount on the foot plates
Max load carrying capacity 30 kg
No-quibble 5 year warranty
Weight including fittings: 760g
Note - This Product is not designed to pull a trailer or attachment of child seats.
Specification
Downloads
Download File
Questions & Answers (11)
Does a Madison Summit Rear Pannier Rack carry Ortlieb Back-Roller Classic panniers?
By Jamie
23 Jan 2023
Also I would be looking to fit this rack onto a Kinesis ATR bike with Hunt 4 Season Disc wheels- would this be compatible? Many thanks for your help.
SJS Customer Service:
Yes the rack should fit the Kinesis, the Ortleib bags will fit the rack, you will need to check you are using the correct clamp spacers for the 10mm rails
Please, what are the dimensions of the top platform ? Thanks
By Marie
22 Nov 2021
SJS Customer Service:
Thank you for your enquiry, it is 10cm wide and 30cm long
WD 22/11/21
WD 22/11/21
axle width? will if fit to the exterior of a boost axle set up?
By Anonymous
25 Nov 2020
max width of the lower attachment points?
SJS Customer Service:
We cannot say if this will fit to the outside of a boost axle, as it's designed to be bolted to a pannier mount. The approx distance from inside to inside of the mounting plate is 168mm.
JK 25.11.20
JK 25.11.20
Can I use this with a Boardman Gravel ADV 8.9E?
By Shana
05 Aug 2020
It has disc brakes attached to the chain stay (left side obviously). There are holes to mount a rack. Wheels are 700c.
SJS Customer Service:
Hi, yes you can. Thanks
Can I use this with 700c wheels?
By Craig
25 Jul 2020
SJS Customer Service:
Yes this product is compatible with 700c wheels.
Can this be mounted to frame with disc brakes mounted on seat stay
By robert
07 Apr 2020
SJS Customer Service:
should be ok, the rack bottom fixing looks to come forward slightly for the bolt
Any good for 29er
By Peter Crosby
28 Jul 2019
I have a cube attention 29er, would this fit ?
Its disk but they are mounted between stays so not and issue
Its disk but they are mounted between stays so not and issue
SJS Customer Service:
This would be fine on a 29" wheeled bike.
Thanks - 29/07/19
Thanks - 29/07/19
Does It Fit To 26
By Eli
24 May 2017
SJS Customer Service:
Hello,
This product should fit your bicycle, however we have not tested this so can not know for definite. The rack itself is made from alloy.
This product should fit your bicycle, however we have not tested this so can not know for definite. The rack itself is made from alloy.
Hi Will This Rack Fit A Giant Defy 1? I Believe That I May Also Need An Additional Seat Clip Too?
By Laura Daniels
05 Jun 2016
With thanks
SJS Customer Service:
Hi,
As we have never tried to fit one these racks to your bike we don't have any way of knowing for definite if it will fit I'm afraid. If you need a seat clamp that can take a rack fittings we stock a few with the basic one being SJSC part 23605.
Thanks.
As we have never tried to fit one these racks to your bike we don't have any way of knowing for definite if it will fit I'm afraid. If you need a seat clamp that can take a rack fittings we stock a few with the basic one being SJSC part 23605.
Thanks.
Does It Have Fitting For A Rear Light?
By Ed
03 Jul 2015
Looks not, but there is a bar at the back, so wondered if there was some kind of facility
SJS Customer Service:
Hi,
There is not facility for a rear light as standard but Madison sell a Universal rear light bracket that could be used with this rack to allow fitting of a rear light. The bracket is SJSC part 26342.
Thanks.
There is not facility for a rear light as standard but Madison sell a Universal rear light bracket that could be used with this rack to allow fitting of a rear light. The bracket is SJSC part 26342.
Thanks.
Hi, Will This Fit To A Bike With Disc Brakes?
By James
24 Jul 2014
Note that I am using a Boardman Team Hybrid with disc brakes.
SJS Customer Service:
Hi,
This rack is not designed to be used on a bike with disc brakes, so it will not fit to your bike without heavy modification.
Thanks.
This rack is not designed to be used on a bike with disc brakes, so it will not fit to your bike without heavy modification.
Thanks.