Shimano CN-HG53 9 Speed Chain - 116 Links
£13.99
was
£13.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
- Hyperglide (HG) series 9-speed compatible chain, recommended for Deore and Tiagra drivetrains
- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets
- Durability is assured through a chromising treatment on link pins, and the heat treatment of rollers, pins, and plates
- Mushrooming of the pins gives unsurpassed side-plate retention, enabling the chain to far exceed the BS/ISO standard for breaking force
- 6.57 mm chain width, optimised for 9-speed Super Narrow HG drivetrains
- Corrosion-resistant grey finish on outer plates
- 116 links, 304 grams
- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets
- Durability is assured through a chromising treatment on link pins, and the heat treatment of rollers, pins, and plates
- Mushrooming of the pins gives unsurpassed side-plate retention, enabling the chain to far exceed the BS/ISO standard for breaking force
- 6.57 mm chain width, optimised for 9-speed Super Narrow HG drivetrains
- Corrosion-resistant grey finish on outer plates
- 116 links, 304 grams
Specification
Downloads
Download File
Questions & Answers (6)
bike chain
By Jess
02 Aug 2025
i have a handcycle, and need to replace the chain.
I need a 9 speed chain suitable for a deore/ shimano hub.
can i join two standard bike shimano chains to make a chain long enough for the bike? the measurements are: Larger (3 speed) hub: 44 teeth, Largest of the 9 speed hub 32 teeth, and measurement from centre of both hbs 76cm
if i can join two chains do the chains come with appropriate fixings to do this? or do i need separate fixings/ pins
finally, what tool do i need in order to fit the chain?
I need a 9 speed chain suitable for a deore/ shimano hub.
can i join two standard bike shimano chains to make a chain long enough for the bike? the measurements are: Larger (3 speed) hub: 44 teeth, Largest of the 9 speed hub 32 teeth, and measurement from centre of both hbs 76cm
if i can join two chains do the chains come with appropriate fixings to do this? or do i need separate fixings/ pins
finally, what tool do i need in order to fit the chain?
SJS Customer Service:
You can join the chains together, we do it with our tandem chains, the chains will be supplied with either a quick link or a joining pin depending on your selection, the HG53 makes an ideal choice. SK 05/08/25
Would this chain be compatible with a Shimano Sora CS-HG50-9 cassette?
By Matt Burley
08 Jan 2021
SJS Customer Service:
Yes, this chain would suit that cassette. Thanks!
JK 11.01.21
JK 11.01.21
HG 53 Chain
By Mark Robinshaw
28 Dec 2020
Is it possible to fit a quick link into a shimano HG53 9 spd chain ? If so , do you stock them ?
SJS Customer Service:
You could fit a KMC 9 speed missing link- like SJS part: 50476 however we have not tested this specific combo to confirm it's a working solution.
JK 29.12.20
JK 29.12.20
Can I use this with Shimano XT 9 speed cassette (Cs-m770) for mbr
By Mark Dudgeon
17 Apr 2020
SJS Customer Service:
yes
How to attach?
By Anonymous
06 Apr 2020
Does this have a power link/ quick release link?
SJS Customer Service:
No, it comes with a Chain Connecting Pin fitted, you'll need to (perhaps) shorten the chain and then push this link through. the IceToolz Chain Tool for 5-12 Speed (SJS Cycles part number : 47767) would be a good choice. RT 080420
which shimano chain for Alivio cassette
By simon mumford
03 May 2019
I am going to order a 9 speed sora rear mech with a 11-32 alivio CS-HG400 11-32 cassette for a road bike. Please could you recommend the correct shimano chain
SJS Customer Service:
This one would be perfectly suitable!
Thanks - 07/05/19
Thanks - 07/05/19