SON Coaxial Adapter w/ Male Connection

Customer Reviews (3)
3.7 / 5| Write your review
£21.99
was
£21.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
For quick and easy connecting and disconnecting of SON dynamo hubs allowing for quicker and easier removal of front wheels.
Product Reviews (3)
Questions & Answers (6) Q & A
Specification
Downloads
Download File  
Product Reviews (3)
Overall Product Rating 3.7 / 5
Works as intended
By De Sisti
30 Jan 2020
3 / 5
I recommend this product
ConsIt has to be soldered onto the cable.
ProsMakes connecting cable hub dynamo easier.
As the title says, it works as it should do, and makes reconnecting the cable to the dynohub much easier. However, if you're not handy with a soldering iron, then the job of connecting it to the cable is going to be tricky.
Good
By Christopher Gillingham
03 Aug 2018
5 / 5
I recommend this product
ConsSwine to set up
ProsWorks
Forget it if you are not good with a solder iron
Tricky soldering required.
By Anonymous
26 Feb 2018
3 / 5
ConsTricky soldering and price.
ProsSimplifies hook-up in the dark.
A better selection of the male plug could avoid some tricky soldering, or perhaps it should be supplied with a pre-soldered tail attached so that only a simple splice is required.
Questions & Answers (6)
Hi, how does the coaxial connector attach to the light cable, does it need to be soldered? thanks.
By
17 Feb 2024
It’s a SON Delux hub and a Busch & Muller Lumitec light unit
Hi
Thank you for your enquiry. Yes, you will need to solder the cable from your light to the male plug for this to work. If you scroll down the page on the item you will see a 'Download' section which contains the instructions from SON.
Kind Regards. JP 19/02/24
Does this replace the spade connector, or is it soldered "above" the spade?
By
24 Nov 2023
This replaces the spade connector and makes fitting and removal simpler. SK 28/11/23
Can I use this with an SP Dynamo hub?
By
21 Dec 2022
Hi
Thank you for your enquiry. This item is only compatible with SON dynamo hubs as they have spade connectors, SP have a different connector on the hub so cant use this item.
Kind Regards. JP 21/12/22
Grease to ease dynamo connector installation/removal
By
23 Feb 2022
Hi, i wondered if you could recommend a grease that would stop dynamo connectors seizing and making them easier to remove, but will also conduct electricity rather than act as an insulator.
For the spades any grease would do. If there is a choice a silicon-free grease will be good, for example, technical vaseline.

JK 24.02.22
Could you use this with a Sinewave Beacon and a SON Deluxe hub?
By
23 Apr 2021
Yes, you can, it will require a bit of soldering, however!

Soldering the wires from Edelux II to the male adaptor
By
31 Dec 2019
Do the two wires from the Edelux II have to be soldered together to the (rear) end of the male part
Yes, you will need to solder these to the fitting.

Thanks - 06/01/20