White Industries 3/32 Inch Trials Freewheel - 20T

In 2002 Doug White decided the world needed a better freewheel. Until then singlespeeders seemed to be content not knowing if their freeweeh would last a week or a year, or fail a mile away from home or hundreds of miles. But what was certain was failure. Overnight the ENO freewheel became the standard to measure everything else against.

Starting with a driver made from heat treated 4130 steel that houses 6 heat treated S7 tool steel pawls, White Industries add an 8620 steel case-hardened and electroless nickel-plated outer gear turning on an Enduro chromium steel bearing. White Industries have basically designed all the weak links out of the system. And because everything wears out eventually, they designed them to be rebuildable.

The Trials freewheels utilize a thicker outer gear (the base, not the teeth) and 72 points of engagement to make those insane moves a little easier to pull off. The freewheel bearings are ABEC 5, made from chromium steel, and use a special Mobil XHP222 extra high pressure grease.

All White Industries freewheels can use either 3/32 or 1/8 inch chains (except 16T single and all DOS freewheels).

- Threads: 1.37 Inch x 24 TPI
- 6 Pawls and 72 points of engagement
- Lockring Colour: Green
- 18.4mm Wide
- Centre of teeth are 9mm from the inner base of the threads
- Recommend freewheel to is White Industries # FWTOOLE and works better on their freewheels than the other 4 prong tools on the market
- Pin spanner needed to remove the lockring is the red Park SPA-2 with 2.3mm / 0.090 inch ends
- Bearing: 61808 (40 x 52 x 7 mm)