Brompfication Chain Tensioner Single Speed MkII

£149.99
was
£149.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
This is Brompfication's new version of the CNC machined aluminium Chain Tensioner for Single Speed Brompton's. We have completely re-designed the chain tensioner to get a cleaner and more elegant look then the original plastic tensioner. The main difference from the old design is that the tensioner arm now rotate around a pivot bolt mounted directly on the rear hub axle. This make it possible to reduce the bulky base of the tensioner and make it follow the lines of the tensioner arm.

More than 2 hours of CNC machining is going into making each of these chain tensioner. The tensioner is machined from 7075-T6 aluminium, one of the absolutely highest grades of aluminium alloy you can get. By using 7075-T6 aluminium it has been possible for us to design a light weight and elegant chain tensioner, without compromising on strength and stiffness. With a weight of only 113 grams including the spring and the pivot bolt, just 10 grams more then the plastic version, it is one of the lightest aluminium chain tensioner for Brompton on the marked. The tensioner come with a stainless steel spring that replace the original spring, and a pivot bolt in titanium.

The tensioner is black anodized to give it a wear resistant and corrosion resistant surface. The tensioner consist of 1 chain tensioner arm, 1 tensioner base, 1 pivot bolt and 1 spring.

Weight: 113 grams including spring and pivot bolt.
Product Reviews (0)
Questions & Answers (9) Q & A
Specification
Downloads
Download File  
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (9)
Replacement Single speed Derailleur wheels
By
04 Dec 2023
Hi SJS,
Where can I find replacement tensioner derailleur wheels specifically for single speed? I can only seem to see wheels for 2-6 speed? I would like to replace my worn out plastic tensioner with the aluminium one here but need the wheels also.
Thanks in advance
Mark
You will need part number # 13755 SK 04/12/23
For use with Kinetics Brompton Rohloff?
By
20 Mar 2023
I have the Kinetics rear triangle and Rohloff hub. Will this tensioner fit that setup?
Hi
Thank you for your enquiry. Unfortunately we do not know if this will work or not as we no longer stock the Kinetics kit, it might be worth contacting Ben there to see what he says.
Kind Regards. JP 21/03/23
Can this tension be used with a SA S-RF(5)W 5-speed hub
By
17 Apr 2021
No, sorry this item is only suitable for single speed

WD 19/04/21
Sturmey Archer 8speed hub
By
10 Sep 2020
will this bolt onto the axle of a Sturmey Archer 8speed hub which according to the SA spec takes 13/32inch dome nuts i.e is this product compatible with this hub?.
NO- as this uses a different thread. The manufacture does not provide a suitable alternative.
chain tensioner idler wheel?
By
04 Dec 2019
Will Brompton standard chain tensioner idler wheels work with this product?
Hi there,

They should work absolutely fine.

Thanks.
is this assembly with a shimano nexus 11-speed hub possible?
By
26 Nov 2019
Hi there,

Unfortunately, as we have never done this we cannot say for certain I'm afraid.

Thanks.
Could this be modified to use with a bolt-in hub?
By
16 Nov 2019
i.e. M10 bolts that thread into the hub from each side. Could you send a photograph of the other side of the tensioner?
It is possible, but not as designed. The inside is CNC;'d to allow for a anti-rotation washer and M10 nut. - I will ask our photographer to add an inside photo.

Thanks - 19/11/19
Does The Chain Tensioner Pivot Bold Replace The Two M10 Nuts ?
By
30 Nov 2016
Does the chain tensioner pivot bold replace the two M10 nuts on the right side or does one nut remain and the pivot bold replace only the second nut that hold the original chain tensioner ?
Hi,

One nut remains as the pivot bolt is only to replace the nut that holds on the original chain tensioner.

Thanks.
Pivot Bold Thread Size And Allen Key Size ?
By
25 Nov 2016
I would like to have some more information about this tensioner:
- what is the thread size of the pivot bold (is it M10) ?
- what is the size of the Allen hex key to fasten the pivot bold ?
- how strong is the spring, is it as strong as the original spring, or even more ?
Hi,

This chain tensioner threads directly onto the Brompton single speed hubs which are 10x1 thread. An 8mm allen key is required for fitting. The spring should be of a similar strength to the original chain tensioner.

Thanks.