Gates Carbon Drive RDM Shimano Snubber

A snubber is needed to prevent the Gates Carbon Drive belt from skipping.

This version is for mounting on Shimano rear derailleur mount Shadow + Mount (SDM). The range of use is between 19T and 22T.

Note: The Snubber is required when Gates Carbon Drive is used on Rohloff hubs.

The Snubber Spacer Kit (CDESK) is required for installation above 142mm.

Rear Derailleur Shadow + Mount (SDM)
Belt-line: fits all common gear hub drives with additional spacer
Sprocket sizes from 19 to 22 teeth