Tange Passage 1 Inch Shallow Steel Cup Threaded Headset - 30.2 mm Stack Height

Customer Reviews (7)
4.9 / 5| Write your review
£17.99
was
£17.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
Durable threaded headset
To suit 1" threaded steerer
Steel races
Caged ball bearings
26.4mm crown race
Product Reviews (7)
Questions & Answers (8) Q & A
Specification
Downloads
Download File  
Product Reviews (7)
Overall Product Rating 4.9 / 5
Good quality, easy to install
By Alex G
20 Oct 2020
5 / 5
I recommend this product
ConsNothing
ProsQuality, ease of fitting
I purchased this for a mid 1990s hybrid. It is good quality, easy to fit and adjust.
By Anonymous
29 Aug 2019
5 / 5
I recommend this product
Product did what was required
Good product very good price
By George
29 Jul 2017
5 / 5
I recommend this product
This was to replace a Campag record H/S (that I had just bought) that was too tall for my old colnago. Fitted easily and looks good.
Decent Kit.
By Andy C
11 Nov 2016
5 / 5
I recommend this product
ConsNone
ProsStack height/price.
Bought this as a replacement for the same headset that was worn out.
Has been good and reliable through winter riding etc, and as I have very few choices due to stack height requirement, it had to be another of these.
Great quick service from SJS. Thanks.
It All Worked Out Very Nicely, Thanks To Tange And Sjs
By Paul
09 Jul 2013
5 / 5
I recommend this product
ConsNone
ProsLow stack, good quality, good value
Used headset on a much loved, 20+ year old tandem after repairs to stripped threads on its steerer tube. Low stack height allowed me to install headset using the bottom, undamaged threaded section of the steerer. This then left enough room to fit the brake hanger above the whole headset assembly rather than between the headset locknut and adjustable race. It was this latter arrangement that had been partially responsible for the threads stripping in the first place! Tandems are hard on headsets so I also substituted loose ball bearings for the supplied caged ones, thereby permitting about 50% more balls to be installed. Not essential, but I'm convinced that it improves headset life considerably! It has all worked out very nicely indeed. Thank you Tange and SJS Cycles.
Does What It Says On The Tin
By Tom
23 Aug 2012
4 / 5
I recommend this product
ProsLow stack, cheap!
Low stack height, meant I was able to mount a decalluer in the headset stack where I wasn't before. Will have to see how long it lasts.
Successful Maintenance Thanks To Tange
By Forester
17 Jul 2011
5 / 5
I recommend this product
ConsNone
ProsRare, great quality, durable.
Difficult to find Headset, and SJSC have not let me down at all! Good quality rare part for maintaining old British made frames, 10 out of 10!
Questions & Answers (8)
Dutchie Dapper
By
25 Mar 2022
Hello there. Will this unit work with my Dutchie Dapper? http://www.dutchie.co.uk/en-GB/bicycles/men/dutchie-dapper-eight-speed

1 inch steerer, 30mm inside diameter head tube and 26.4mm crown race. Cheers!
This should work, however, the height of which your stem may sit might be a little different.

JK 28.03.22

Hi, I assume this is the satin silver (as pictured), not the chrome version? Thanks.
By
05 Feb 2022
Thank you for your enquiry, yes item is as pictured and satin silver

WD 07/02/22
I have a 1980 Carlton cyclone will this head set fit my bikeThanks
By
02 Apr 2020
I don't think so IF you have the original fork. Carlton (by Raleigh) used 26 TPI (threads per inch) this headset is the standard 24 TPI. take the fork out and count the number of threads per inch, if that's ok (24) check the other dimensions
90s Bianchi alloy gold race
By
24 Oct 2018
Hi will this fit the above more concerned about crown size tried a cheap 1 inch threaded headset but the crown was loose
Hi there,

As we do not stock that particular bike we would have no way of knowing im afraid.

Thanks.
25/10/18
Can I use this with a Raleigh banana?
By
18 Aug 2017
The steerer tube is 205mm and head tube is 172mm with 30mm inside diametre which would leave me with a stack height of 33.. I still have a bit in the steerer that I could remove.
Hi,

You may need to fit an additional spacer, otherwise you should be okay to use this headset with your bike.

Thanks.
Stack Height
By
21 Dec 2016
Hi,
Not sure whether to go for the Falcon or the Passage .... which would be the more robust and trouble free long life? Stack height on present headset is 35 mm plus about 3mm for cable hanger ( 1990's Stumjumper MTB) what would you suggest?
Hi, the Falcon is sealed cartridge so long term will most likely last longer as you don't have to worry about the cage holding the bearings disintegrating in the headset. That being said we have sold the Passage for at least 10 years so its very popular. I would personally go for the Falcon with its sealed bearing.

Regards
Will This Work On A 1980S Colnago Super Frame ?
By
25 Sep 2016
Hi
Planning a replacement of a 1 inch threaded headset on my Colnago Super. Any known issues on such frame before I order? Really want a short stack headset like this Passage.
Thanks!
Andrei
Hi,

As we have never stocked Colnago frames we unfortunately don't have any way of knowing headset compatibility with your frame I'm afraid. If your frame takes standard ISO 1 Inch headsets then this headset should fit fine.

Thanks.
Does It Have French Thread?
By
06 Sep 2014
I have an old french bike with a really short stack height head set. I would like to know if the item you offer match my needs.
Regards
Hi,

Unfortunately none of the headsets we carry will work with the old French threading on forks.

Thanks.