Sturmey Archer Trigger Cable Black 1570 X 1420 mm & HSL 759 - HSJ102

Question 1

trigger cable ferrule

By yomama

20 Jan 2022

Hi. Does this set include the trigger cable ferrule HSJ552

SJS Customer Service: · Answer

Thank you for your enquiry, no sorry as per photo, HSJ552 is not included

WD 20/01/22

Question 2

Is there a longer cable available?

By john

09 Nov 2020

HI, I need a longer gear cable for my SA 3 speed hub as I've changed the bars and fitted a longer stem.

I have the plastic thumb shifter which connects via a small barrel on the end of the cable.

There is also a thin cylinder on the other end of the cable where it joins the adjustment mechanism.

Many thanks for your help.

SJS Customer Service: · Answer

Unfortunately there are no longer cables available, but you can use non Sturmey outer.

Thanks - 13/11/20

Question 3

Sturmey Archer Trigger Cable Black 1570 X 1420 mm & HSL 759 - HSJ102

By Mike Osborne

01 Sep 2020

Sturmey Archer Trigger Cable Black 1570 X 1420 mm & HSL 759 - HSJ102

I don't understand which cable I need for my 3 speed gears
My cable is 1420mm long and I need a cable conduit but what does 1570 and 759 - HSJ102 mean - is this the one?
Any thoughts?

Many thanks

Mike

SJS Customer Service: · Answer

Hello, so the outer cable for this

The HSL 795 is the code for the anchorage and the HSJ102 is the code for trigger cable

The outer cable is 1420mm Long
The inner cable is 1570mm Long

Hope this helps,

Question 4

Can this be used on a -T thumb shifter on a brompton the hub is

By David Clarke

25 Feb 2020

The hub is a SRF5(W)) a green gear chain

SJS Customer Service: · Answer

Yes, but these take a Shimano style gear inner not the one provided.
SJS Cycles part number : 3053

Thanks - 28/02/20

Question 5

Hi, have an old 3 speed hub.

By miles brown

05 Dec 2019

bought a standard oxford cable set to replace but the barrel coonector supplied is a little small in diameter to connect. Which cable set do you think I need - shiter is 3 speed trigger type.The thread to connect onto is not attached to a chain, mpore like a pivot lever.

SJS Customer Service: · Answer

SOUNDS like you MAY have an old type Shimano 3 speed hub, can you clean it off and see or take photos and email [email protected] with your needs RT 10/12/19

Question 6

Will this trrigger cable work with my thumb shifter?

By Robert Swainson

05 Nov 2019

I just received 19255 SA trigger cable and it differs from the one I am taking off. The outer wire has a nipple sticking out of one of the end ferrules and the inner wire end ferrule is longer and thinner. .

SJS Customer Service: · Answer

This is too skinny, you need a standard gear inner.

Thanks- 05/11/19

Question 7

Hi, Does this trigger cable fit the STURMEY ARCHER AW3- 3 speeds hub. MANY thanks..

By ALVIN LIM

15 Jul 2018

SJS Customer Service: · Answer

Yes this will be suitable.

Thanks

Question 8

LENGHT

By Jaime Humberto Lopez

26 Dec 2017

Hi friend, could you tell me the total lenght of the inner and the outter cable?

SJS Customer Service: · Answer

Hi,

The outer is 1420mm and the inner 1570mm.

Thanks

Question 9

Will this be suitable for a 1966 S/A SW Hub?

By Tim Regester

20 Sep 2017

I am rebuilding an old Triumph with 3 Speed SW Hub and need to replace the gear cable.

SJS Customer Service: · Answer

Hello,

This should work without an issue, however as it is not a hub that Sturmey Archer stock any more we have not tried this ourselves so we cannot say for certain.

Thanks.

Question 10

Do You Think This Cable Is Suitable For A Pashley Princess With 5 Sp S. A.?

By Ray Stephenson

13 May 2017

SJS Customer Service: · Answer

Hi,

It will depend on the age of your shifter, if it is the older style that requires this type of cable nipple then it should be okay. Obviously the length will need to be take into consideration.

Thanks.

Question 11

I Need Sturmey Archer Cable For Sparta Tandem

By Paddy

04 Nov 2013

SJS Customer Service: · Answer

Hi,

Which cabling you need is dependant on how modern your shifter is, if you have a modern shifter then any standard gear cable will fit fine. If you have an older shifter you'll need this cabling (which you have left this question on), a connector and a standard gear cable to extend it.

Thanks.