SJSC Double Fixed Track Hubs with High Quality Sealed Bearings - 36 Hole - Polished Alloy

Customer Reviews (3)
4.7 / 5| Write your review
£49.99
was
£49.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
A high quality Large Flange pair of track hubs, front OLN is 100mm, rear OLN is 120mm but will respace up to 130mm with the addition of washers. Rear Axle is 10mm in diameter, Front is 9mm, and hollow for lightness. Overall length of the axle is 165mm. The hub can be spaced to 130mm without swapping the axle.
Very good value for money compared to other hubs.Supplied with 2 lockrings.
Replacement bearings. - These are the same bearing for both front and rear a 6000-2RS sealed bearing.
Chainline is 42mm
Wheelbuilding Data
Front : OLN : 100.0 mm
dL,dR : 62.2 mm
wL,wR : 33.5 mm
Spoke Hole Diameter : 2.5 mm
Rear : OLN : 120.0 mm
dL,dR : 62.2 mm
wL,wR : 28.0 mm
Weight: 525g (pair)
Thread: 1.375" x 24tpi / 1.29" x 24tpi
Product Reviews (3)
Questions & Answers (6) Q & A
Specification
Downloads
Download File  
Product Reviews (3)
Overall Product Rating 4.7 / 5
Excellent
By Jamie Rhodes
27 Jan 2021
5 / 5
I recommend this product
Exactly what they claim to be. Great value hubs, well made and good bearings.
Nice Hubs
By Jim Higson
09 Oct 2012
4 / 5
I recommend this product
Conslimited drillings
Prosshiny, spin freely
Have ridden as a road fixed gear bike for only about 200km so far so can't give any long term impressions but the build of the hubs seems good enough and they spin very freely.

As the previous reviewer states, they are also respacable down to 110mm which Toby at SJS were very helpful with, even providing me with the thinner washer at no extra charge.

With silver Open Pros and 36 silver DT Swiss Revolution spokes the wheels look very nice and should be more than strong enough for my needs. Would maybe have been nice to have had more drillings since I don't really need 36 spokes in the front. 28 would for sure be enough.

I probably didn't need to spend the money on Open Pros. I guess I'm weak for double eyelets, they make the build so much easier.

The finish is slightly rough around the cutouts on the flanges but to be honest this is getting really picky. The price is good for the quality, I could find rebranded track hubs elsewhere for slightly less but at £60 for the hubset and knowing these are good I'd certainly buy again and recommend the hubs to friends.

I worry slightly if they are sealed enough to take on the road but no problems so far.
Excellent Value Fixed/Fixed Hubs
By Vikingfixed
08 Oct 2010
5 / 5
I recommend this product
Consnone
ProsQuality, Finish, Price
Very nice quality hubs for the price. Excellent finish and good quality spacers and nuts. Bearings seem reasonable quality too, time will tell. I've built these up into a very nice classic-looking wheelset with Mavic open sport rims for my vintage track bike. And yes, the rear hub has been respaced to 110mm very easily.
Questions & Answers (6)
Can you altered the OLN from 120 to 112, is this advisable?
By
02 Aug 2023
We do not advise reducing the OLN, you will experience clearance issues with the sprocket and the frame. SK 03/08/23
Standard British thread?
By
07 Feb 2019
Hello,

What is the thread pattern for these hubs?
1.37 x24 (sprocket) and 1.29 x24 (lockring)?

Thanks,
Gert
Indeed, British pattern.
lock ring 1.29 x24 fits well.
Many thanks
07/02/19

Can You Run A Single Freewheel On These Hubs?
By
12 Jan 2017
Hi,

These are fixed only so cannot be used with a freewheel of any sort I'm afraid.

Thanks.
Wheel Building
By
23 Oct 2016
have a 1987 centurion super leman with sakae cranck rebuilded to SS. I wish to build new wheels. I f i use these hubs, how shall I then build the rear wheel: which spores and rims and how to find out the length?
Hi,

If you're planning to build the wheels yourself then you'll need the hubs and the rims to measure them. With the measurements you can use a spoke calculator to work out the correct length. If you want us to build up these hubs for you we can with any combination of rims and spokes you like.

Thanks.
Axle Swap
By
11 Oct 2016
I have a lates 50s track frame with 9mm rear drop outs and 8mm (5/16"?) front drop outs. Would it be possible to swap the axles out for one that would fit?
Hi,

There is nothing we'd be able to offer to achieve this, but in theory it is possible. As well as new axles you would need new lock nuts, axle nuts and new bearings to allow them to properly fit within the hub.

Thanks.
Replacement Axles
By
06 Nov 2014
Do you sell replacement rear axles for these hubs? If not do you know where I can get one? thanks.
Hi,

There are no specific spares available for these hubs, but we do a number of Wheels Manufacturing axles that will match the current axles depending on whether its for front and depending on the hub spacing of the rear.

Thanks.