RevoLoop Race Lightweight 40mm Presta Tube 700c / 28" Tyres - 0.7" to 1.1" - 18-622 to 28-622
					£23.99
					
			
			was 
				 
								
								
								
							 
                            
                            
							
							
						
								
									£23.99
									
									
									
								
								was 
							
							
							
							
 							
						Manufacturer : 
							SJS Cycles part number : 
							Manufacturer part number : 
						Details
								The REVOLOOP.race is the lightweight tube for the agile, demanding racer. The racing bike tube weighs only 39 grams and, due to the specific material coordination of the thermoplastic polyurethane, is at the same time considerably more durable than a conventional butyl tube. The low weight reduces the rotating mass on the wheel and makes the Racer more agile in the sprint and on the track. 
The valve is made of a particularly impact- and break-resistant thermoplastic and is ahead of its time. Minimum weight is paired with maximum performance. A specially designed valve foot prevents damage to the tube due to sharp edges on the valve bore.
- ETRTO: 18-28 / 622
- Inch: 28 x 0.7-1.1
- Presta Valve: 40mm
IMPORTANT: Please never fill your REVOLOOP hose with a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.
							The valve is made of a particularly impact- and break-resistant thermoplastic and is ahead of its time. Minimum weight is paired with maximum performance. A specially designed valve foot prevents damage to the tube due to sharp edges on the valve bore.
- ETRTO: 18-28 / 622
- Inch: 28 x 0.7-1.1
- Presta Valve: 40mm
IMPORTANT: Please never fill your REVOLOOP hose with a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.
Specification
					Downloads
						
								Download File   
							
						
 
					Questions & Answers
				
			If you have any questions ask here or phone 01278 441500 (+44 1278 441500).