Call us on 01278 441500

Busch & Muller Rear Carrier Light Bracket for D Toplight Light

Customer Reviews (5)
3.2 / 5| Write your review
£4.99
was
Details
Product Reviews (5)
Questions & Answers (0) Q & A
Details
50mm and 80mm bolt centres for light fitting. 160mm long
Specification
Downloads
Download File  
Product Reviews (5)
Overall Product Rating 3.2 / 5
Not Straight
By
27 Sep 2016
3 / 5
I recommend this product
ConsAttaches the light at an angle
ProsAttaches a light to a rack
The bit the light actually attaches isn't straight. Not a big deal, it works overall, but the angle annoys me.
Rear Light Bracket
By
07 Jun 2012
5 / 5
I recommend this product
Consslightly heavy
Prossturdy, adaptable, strong.
Unsure why I read these negative comments I found this to be "just the job" for my Canondale proprietary rear rack and whilst I'm aware it is meant for a different rack it was readily useable with the single hole available to me and a judicious cable tie.

It was straight and true and undamaged in transit Although I could have fashioned my own from hardware store parts I should say this was the preferable solution, if very slightly over engineered for the need (not the lightest bracket!).
B&M Rear Light Bracket Review Update
By
03 May 2012
3 / 5
I recommend this product
ConsCross bar is not welded on straight.
ProsEnables installation of a rear light without a mounting point.
As it turns out, even though the bracket is not welded straight, there is enough play to be able to adjust the tail light. The holes could also be drilled slightly bigger to allow more adjustment.

I still feel that more care could be taken to weld the bracket straight, but it works fine on my bicycle, but I am changing my review to a more positive one.
B & M Rear Light Bracket
By
26 Apr 2012
2 / 5
ConsCross bar is not welded on straight.
ProsEnables installation of a rear light without a mounting point.
While the bracket was in transit, I managed to make my own out of two angle brackets. This was possible only because I have two existing holes on the top of my rack.

The bracket received is indeed of poor workmanship. The cross bar that holds the light is welded on crooked. It's a small detail but I like things on my bicycle to be straight. The bracket seems otherwise strong and durable, but I don't find it to be a cheap item considering the poor workmanship.

B&M Rear Light Bracket
By
05 Nov 2010
3 / 5
I recommend this product
ConsOnly average workmanship
ProsEasy fixing
Strong bracket but mine was bent when it arrived and welded slightly out of true.
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).