Jtek Alloy Dynamo Headlamp Bracket M5 Fork Crown Mounting - Black

Customer Reviews (9)
4.3 / 5| Write your review
£14.99
was
£14.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
V-brake or cantilever brake (with spacing adaptor) compatible.
High quality CNC'd alloy headlight bracket, anodized black.

Includes:

M5 x 20mm socket allen key bolt (for use with V-brake equipped cycles)
M5 x 40mm socket allen key bolt and alloy spacer (for use with Cantilever equipped cycles)
M6 x 25mm button head allen key bolt
2 x M6 washers
1 x M6 nylock nut (for headlight mounting).

Unlike pressed steel headlight brackets this tough bracket will not fatigue and fail from road vibrations.
Product Reviews (9)
Questions & Answers (11) Q & A
Specification
Downloads
Download File  
Product Reviews (9)
Overall Product Rating 4.3 / 5
Not long enough
By Max
18 Jun 2021
2 / 5
The longest of the bolts doesn't even come out the other side of my Surly Straggler's fork crown. Not suitable for my bike. Suggest you measure the length of bolt you'll need first.

Lovely mount thought. Will get it on the bike once I can find the right bolt!
Superb
By Geoff
08 Nov 2017
5 / 5
I recommend this product
ConsNothing
ProsEverything
Beautifully and simply made from solid aluminium alloy. Easy to fit and stale in use. A far better option than the bent wire or sheet material alternatives.
Solid, Well Built, But No Use For A Thorn Sherpa
By Richard Forbes
11 Jan 2017
3 / 5
I recommend this product
Proswell made
This bracket is well made but unfortunately my Thorn Sherpa uses a M6 fork crown bolt and this is M5 compatible. My bad but because the rest of the bolts on my Sherpa are M5 I just assumed the fork crown would be the same.
Solid Bracket, But Limited Compatibility
By Gazza_d
01 Oct 2016
4 / 5
I recommend this product
Check compatibility carefully before purchase (unlike me)

This is a solid bracket which replaced a factory bent steel bracket that broke on my Moulton TSR.

The mounting hole needed to be expanded so the M6 Moulton bolt would fit.

Also I found that my light (a Herrmans H-One-S) was too wide for the mount, but fits fine just bolted through one side, with a longer bolt secured to the other hole. Mentioning the inside clearance for lights in the description would have been helpful
Works Well
By Luke Hall-Bland
12 Jun 2012
5 / 5
I recommend this product
ConsBolt length, only fits light, only available in black
ProsWell made, Strong
The bracket is very well made, however there are some minor gripes with it when using it with my Schmidt edelux and front reflector. You will need to file down the inside as its only wide enough to fit the light itself, so if you want the below light mounted front reflector you've got a lot of work ahead of you. This does show how sturdy it is that you cannot flex it enough to fit a thin sub 1mm bit of metal in beside the light mount.

If you use this bracket on the fork crown with cantilever brakes you will also need to get a longer M5 mounting bolt, as the longer one supplied will only just fit through the front side of a hollow steel fork crown.

Other than that its a great product, I only wish they made it in a polished silver version to match my edelux!
Thorn Alloy Dynamo Headlamp Bracket
By larry hendrick
11 Dec 2011
5 / 5
Prossolid, beautiful
Works, but I had to buy a longer (3 inches/80mm) M5 bolt to get through the spacer, the bracket and the fork bridge. Beautifully made, solid mount.
Perfect For Supernova
By Mr Patate
14 Oct 2011
5 / 5
I recommend this product
Prossolid, nice
Absolutely perfect to fit a Supernova E3 on a fork with cantilever brakes!
Now This Is A Proper Front Light Bracket
By DAvid Kirton
11 Apr 2011
5 / 5
I recommend this product
ProsAbsolutely solid
This is so much better than the pressed steel equivalents. I needed a couple of washers to mount my Hope front lamp, and it needed an M5 instead of the supplied M6 Allen Bolt, but this is minor gripes. Yje bracket is rock solid and does not rattle against the mudguard like others I've had.
Very Nice
By John Buttery
22 Mar 2011
5 / 5
I recommend this product
Compared to sheetmetal brackets, this one is built like a hammer and will probably outlast the bike. Managed to fit a retro battery lamp to it by machining a brass spacer. Also had to lengthen the spacer tube on the straddle wire by about 10mm so that there's a clearance. No loss of braking as a result.
Questions & Answers (11)
Can it fit a Sinewave beacon?
By
08 May 2021
Required for a specialized sequoia front carbon fork. Expect will need extra fittings as disc brake setup.
Currently just the hole at the crown.
YES- I've tested this with the Sinewave beacon and the fit is fine.

JK 10.05.21
Will this work for mounting a Supernova E3 to my Cinelli Hobootleg?
By
11 Jan 2021
it should do as long as the fork crown bolt takes an m5 bolt. We have not fitted this part to guarantee if this will definitely fit.

JK 11.01.21
Would this fit on a Haibike e-bike on to the front suspension forks to suit
By
09 Dec 2020
Forks to suit The Haibike Skybeamer 300 100 lux
As we are not a Haibike dealer, we are unable to confirm if this will fit.

JK 10.12.20
Can i use this with a B&M IQ-X dynamo light?
By
25 Mar 2020
Hi
Thank you for your enquiry, yes you will be able to use this bracket with the B&M IQ-X light.
Regards. 26/03/20
Cateye fork mount compatible?
By
01 Apr 2019
Could I combine this with the business end (plastic bracket) of a cateye fork mount bracket? By removing the metal fork mount off the cateye mount? I hope that makes sense.

Thank you SJS!
No the spacing is too narrow on the Jtek mount.

thanks - 02/04/19
What Are The Dimensions Of The Bracket?
By
30 May 2017
Hi, the length is 40mm, height 50mm, the extension is 20mm
Width Lamp Mount
By
21 Feb 2017
What is the width between the brackets that the lamp mounts too? I looking too mount a GoPro fitting.
Hi,

This unfortunately would not be suitable for a Go-Pro fitting as the internal width is 9.5mm and the external width is 15mm.

Thanks.
What'S The Thickness Of Light Unit That Can Fit Into The Bracket?
By
29 Dec 2016
Hi,

The light fitting is standard 10mm, the same as used by most Dynamo lights like those from Schmidt, Busch and Muller as well as Supernova.

Thanks.
Suitable For A Brompton?
By
22 Jul 2015
I have one of these brackets on my Thorn Raven Tour and its excellent! Is it suitable to replace the Brompton front light fitting?
Hi,

Unfortunately you would not be able to fit this bracket to a Brompton. There is very little space on a Brompton for a front light bracket, this bracket would stop you fitting the brake properly, it's also unlikely it will clear the headset and even if it did it would raise the light up too much so would prevent the fitting of luggage and possibly interfere with the fold. The only suitable brackets are the ones marked up as Brompton specific.

Thanks.
Surly Lht With Cantilever Brakes
By
10 Jul 2015
Hi, will this mount work with my Surly LHT with Cantilever Brakes? I am trying to mount a Busch and Muller Lumotec IQ Cyo RT. Thanks.
Hi,

This light mount should be fine for use on a Surly LHT fork and will be able to take that light fine as well.

Thanks.
Busch & Muller Lumotec Iq2 Luxos U Senso Plus
By
23 Nov 2014
Is this mount suitable for use with the Busch & Muller 'Lumotec IQ2 Luxos U senso plus'?
Hi,

Although the fittings are the same it would depend on the amount of clearance you have as the B&M Luxos U is quite a large light. If clearance isn't going to be an issue then it will work fine.

Thanks.