Home > Electrical > Lighting > Lighting - Dynamo Rear

Busch & Muller Toplight Line Small Rear Dynamo Light

Customer Reviews (1)

5 / 5| Write your review

£24.99

was

View supersize image

£24.99 was

Manufacturer :

SJS Cycles part number :

Manufacturer part number :

Details

A single LED glows bright red and spreads the light across the width of the lens. This allows the driver behind you see more than just a point source from the light.

The holes on the light are 50mm apart and allow it to be fitted to rear racks. And it also has a standlight function which will stay lit for up to 4 minutes after you stop.

Please note that the light will not handle the full power of a dynamo without a front light being installed within the circuit & is supplied with a short section of twin core cable fitted with two 2.8mm male spades, suitable for connecting to 2.8mm insulated female connectors.

Related products

Wurth Cable Connector Red Insulated 2.8mm x 0.5mm Female x 1 - Fits B+M Dynamos & Lights £0.25 Inc VAT Quick view

Product Reviews (1)

Overall Product Rating 5 / 5

Perfect fitted like a dream and replaced the old red lens light

By Mike Parker

04 Nov 2022

5 / 5

I recommend this product

Good price awesome bright light ??

Questions & Answers (6)

Is the black base part aluminium or plastic?

By Hugo

15 Nov 2022

SJS Customer Service:

Thank you for your enquiry, it is plastic

WD 15/11/22

Son compatibility

By Laurent

26 Oct 2020

Hi,
Can I connect it to an Edelux II headlight?
Thanks.

SJS Customer Service:

Yes, you can!
Make sure you order the cable to connect front and rear lights together! We suggest SJS part: 15905

JK 26.10.20

Compatibility and wiring question.

By Jay Sharp

16 Dec 2019

Would this light be compatible with a Shimano DH 2N35 hub and a Busch and Muller Lumotec Lyt N front lamp and if so which wire and connectors would I need to connect it to the front lamp? Also would I need to buy a connector to join the Lumotec lamp to the dynamo?

SJS Customer Service:

yes, the rear light is supplied with a short section of twin core cable fitted with two 2.8mm male spades, suitable for connecting to 2.8mm insulated female connectors. (such as SJS Cycles part number : 4614) you'd also need a wire such as Dynamo Wire Double Core - Black with Standard Push On Connector 2.1 Metres Long (SJS Cycles part number : 25542) RT 17/12/19

Does it come with the cable and connectors?

By Kevin

13 Jan 2019

I’m internally routing the cable through my bike frame so I’ll need about a 152cm in length.

SJS Customer Service:

These come with a small amount of cable, you can see this in photo two, you will then need to add some connecting cable.

Thanks - 14/01/19

Can I get this on a tortec velocity rack?

By Jon Wheatley

13 Jul 2017

Hi, I 've recently swapped my dynamo setup on to my light tourer and wanted to find a rear light small enough to fit onto a tortec velocity rack. Would this be suitable or can you recommend an alternative? I've got a luxos U on the front and an XT hub dynamo.

SJS Customer Service:

Hi,

Unfortunately not, these racks only have a single mounting bolt hole whereas these B&M lights require a two hold fixing 50mm apart.

Thanks.

Is It Compatible With Brompton'S Rack ?

By Florent

16 Sep 2016

I would like to replace the Brompton rear dynamo light on my rack with this light. Will it fit ?

SJS Customer Service:

Hi,

Both this light and your Brompton rear rack/light use a 50mm bolt spacing so you should be fine to fit this light in replacement of your current one.

Thanks.