Fahrer E-Bike Latz Mudflap - Black

Suitable for a mudguard width of 60-65mm

The mud flap E-Bike Latz prevents the rainwater thrown up while driving from getting your shoes, pant legs or bike trailer wet and dirty. The mudguards often do not manage to drain the splash water sufficiently, which is why the splash guard serves as an extension of the mudguard. That makes the trip to the office or the bike ride even more comfortable. In addition to protecting clothing when riding on wet roads, the E-Bike Latz also prevents thrown stones from damaging the paint on the frame.

The mud flap is made from a truck tarpaulin and attached to the lower part of the mudguard as an extension. Thanks to the reinforced material, the splash guard remains dimensionally stable even at higher speeds and against a headwind, which is why it is ideal for use on e-bikes. The E-Bike Latz can optionally be mounted on front or rear wheel mudguards with a width of 60-65mm on the mudguard struts.

Features:
- Bicycle mudguard-extension made from truck tarpaulin
- Dimensionally stable even at higher speeds
- Colour: Black
- Material: Truck tarpaulin
- Reinforced and optimized for use at higher speeds
- Length: Approx 230mm / Width Top: 83mm / Width Bottom: 120mm
- Attachment to the fender stays with cable ties (included)
- Weight: Approx 36g
- Designed in Berlin
- Includes 1 x Mudflap / 3 x Cable ties

Mounting:

Thread a cable tie from behind through the two holes on the left and right of the bib so that the pointed ends are at the top and the fastener is at the bottom. Now turn the splash guard over and place it in the middle of the lower end of the mudguard. Place the cable ties on the left and right around the fender struts and tighten. Cut off the protruding ends of the cable ties with side cutters.