Mudhugger Long EVO Bolt-On Front Mudguard for Most Fox Forks

We've had the benefit of designing the Mudhugger EVO MTB mudguard around the 2021 Fox 36 and 38's and 2021 Rockshox ZEB (not compatible with 38mm offset ZEB) and Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB and Domain, see options) but stilll compatible with older (2017 onwards) Fox forks 34 and 36 (including Fox / Marzocchi) which have bolt holes.

- This version is NOT compatible with the 2026 Fox 36 forks
- Not compatible with Marzocchi Bomber Z2 or updated 2025 Z1 (no bolt holes in fork brace)
- For 2022 onwards Fox 34 you'll need to use the Quick Fit Kit for Front EVO Mudhugger kit as the fork brace is hollow and the bolts have very little to tighten to
- The Fox AWL chassis has no threaded bolt holes and therefore is not compatible
- Sadly the Fox 34 stepcast fork is too narrow to accept the EVO Mudhugger MTB mudguard
- Also compatible with Ohlins RXF and DH forks (adapter bracket required)
- Compatible with RS Recon Gold & Sliver 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately)
- PLEASE NOTE: For all downhill forks (not compatible with older 650B Fox 40's) we have the Quick Fit Kit for Front EVO Mudhugger which are used to brace the Hugger in the wider DH forks. You will still need to order the separate adapter for Ohlins DH forks

- Length Total: 515mm
- Rear Extension: 330mm
- Front Extension: 185mm
- Weight: 125g (without fittings)

Bolts directly to the back of the fork brace. Default Fox kit supplier with rubber pads, bolts, washers and hex key to install to your Fox forks. For ZEB, new Domain, Recon, DV0 and Ohlins, an Adapter Pack is required, sold separately.

- Shorty version of the Long EVO
- More mud clearance
- No more crown fouling at full compression
- Stiffer
- Subtle kicker to keep length as short as possible without compromising spray protection
- Extra tabs added for quickfit straps for wider DH forks
- 100% recycled PP
- Designed, made and packed in the UK