SKS Raceblade Long Mudflap for 35mm wide guards

I recommend this product

Very easy to fit to a 35 mm SKS front mudguard. Just requires a single 5mm diameter hole drilled for the nylon bolt. As a precaution I applied a dab of adhesive to the thread and underside of nut, in the unlikely event of it working loose.

I recommend this product

The mudflap extender is just the job for adding a little extra length on the front guard. (Without this, all the muck and mud scores a direct hit on the bottom bracket shell!)
Great quality, cheap and fits the SKS square section guard perfectly.

I recommend this product

Do the job perfectly, fit many manufacturers mudguards with a bit of adjustment. Personally I drill 2 extra holes through flap and mudguard and rivet them in in place just in case the plastic bolt lets go

I recommend this product

Easy to fit, does the job, fast delivery, great price - what’s not to like?

I recommend this product

Easy to fit. Lost one previously due to plastic screw so may want to consider switching a sturdier screw/bolt.
But otherwise fits on 35mm mudguards perfectly and is great for wet riding. Bargain

I recommend this product

Easy to fit - just slide on, punch a hole and screw secure using the plastic threaded nuts provided.

I recommend this product

One small criticism, plastic screw fixing on previous same design mudflap came unscrewed. This time I used a stainless fixing with lock nut instead of the plastic supplied.

I recommend this product

OEM replacement that also fits the 35mm standard SKS Longboard mudguards. Fast delivery from a most reputable supplier.

I recommend this product

Love these mudflaps. They're big enough to be completely effective and sleek enough not to look too awful on a road bike. The days of a stripe of mud up my face and back are OVER! Only drawback is that the attachment is via a plastic screw which doesn't feel that secure.

I recommend this product

Quick service , good price and look good on the race blades. These mudflap give just the extra needed to save the rider behind.

I recommend this product

We recently bought Sks chromoplastic mudguards for our new bikes. The mudguards didn't come with rear mud flaps. These mud flaps fitted perfectly and were quick and easy to put on.

I recommend this product

Nice addition to my raceblade guards. Very easy to fit, just slide the mudflap over the end of the mudguard and drill through with a 5mm drill. Fit the bolt provided and the job's done. I have the 'standard' race blades (about 35mm wide) and the mudflaps fitted these well.

I recommend this product

very nice quality easy to install slipped onto my sks 35mm mudguard drilled a 5mm hole the part that holds in on just screws together didn't need to take the wheel off the screw part isn't really necessary because its very snug but worth doing for extra security typical sks quality and came in 2 days very happy ordered another 2 for the wifes and sons bikes