DT Swiss RR 411 SBWT 700c 622 Road Rim - Black
£79.99
was
Holes
£79.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
- A lightweight modern road rim with a 18 mm internal width for wider road or cyclocross tyres
- Low profile and carefully load-optimised design produces a rim that, despite its extra width, is the same weight as many narrower premium alloy rims from other brands
- Symmetrical rim profile is best used on the front, paired with an asymmetrical rim for the rear
- Can be run either with standard clinchers or road tubeless tyres using DT Swiss tubeless tape and valves
- Comes packaged with DT Swiss Squorx ProHead nipples and PHR washers to complete your build
- Strength Boost Welding Technology creates a perfectly welded join for a durable, reliable rim
- Machined sidewalls for powerful braking on a consistent sidewall surface
- Wear indicators show the extent of sidewall wear
- PHR washers and convex Squorx nipples naturally align perfectly with your chosen spokes, increasing stiffness and durability with no weight penalty over traditional eyeleted rims
- Unique process for the black coating produces a tough and durable finish
- Suggested maximum system weight of 120 KG, those looking for a rim for heavier riders or for mixed terrain riding are advised to consider the suitably tough RR 511's
- Presta drilling
- ERD: 601
- Outer width: 21.5mm, Inner Width: 18mm
- Height: 21mm
- Max spoke tension: 1200N
- Weight: 435grams
- If built by us we will use Brass nipples due to durability issues we have experienced.
- Low profile and carefully load-optimised design produces a rim that, despite its extra width, is the same weight as many narrower premium alloy rims from other brands
- Symmetrical rim profile is best used on the front, paired with an asymmetrical rim for the rear
- Can be run either with standard clinchers or road tubeless tyres using DT Swiss tubeless tape and valves
- Comes packaged with DT Swiss Squorx ProHead nipples and PHR washers to complete your build
- Strength Boost Welding Technology creates a perfectly welded join for a durable, reliable rim
- Machined sidewalls for powerful braking on a consistent sidewall surface
- Wear indicators show the extent of sidewall wear
- PHR washers and convex Squorx nipples naturally align perfectly with your chosen spokes, increasing stiffness and durability with no weight penalty over traditional eyeleted rims
- Unique process for the black coating produces a tough and durable finish
- Suggested maximum system weight of 120 KG, those looking for a rim for heavier riders or for mixed terrain riding are advised to consider the suitably tough RR 511's
- Presta drilling
- ERD: 601
- Outer width: 21.5mm, Inner Width: 18mm
- Height: 21mm
- Max spoke tension: 1200N
- Weight: 435grams
- If built by us we will use Brass nipples due to durability issues we have experienced.
Specification
Downloads
Download File
Related products



Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (2)
I have damaged R21 Dicut rim - is this compatible as replacement?
By Nestor Patrikios
01 Dec 2019
SJS Customer Service:
Hi there,
This would work but you will need slightly different length spokes. We would consider contacting Mavic to try and get the direct replacement rim.
Thanks - 02/12/19
This would work but you will need slightly different length spokes. We would consider contacting Mavic to try and get the direct replacement rim.
Thanks - 02/12/19
max system weight
By Anonymous
06 Sep 2019
The DT Swiss webpage for this rim says max system weight is 130kg, but your page says 120kg... which one is correct?
https://www.dtswiss.com/en/products/rims/road/performance/rr-411/
https://www.dtswiss.com/en/products/rims/road/performance/rr-411/
SJS Customer Service:
Our site is listed as 110kg, this has now been updated to match DT Swiss with 120kg.
Thanks - 06/09/19
Thanks - 06/09/19