Call us on 01278 441500

Brompton 16 x 1 3/8 , 349 Standard Drilled Double Wall Rim - Silver - 28 Hole

£19.75
was
Details
Product Reviews (0)
Questions & Answers (3) Q & A
Details
For all Brompton front hubs (incluing hub dynamos) and 2 speed rear hub.

Not compatible with Internal Gear rear hubs

ERD - 328

Please note Brompton have selling restrictions to some countries who have their own dealers. If you are unsure please contact our sales team.
Specification
Downloads
Download File  
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Questions & Answers (3)
Exact Erd For Brompton Standard Drilled Double Wall Rim
By
13 Oct 2014
I've just got an email response from the brompton tech support that the ERD for this rim is 320. Which I assume is exactly the same as this one listed on the brompton website?
http://brompton.com/spares/part/6712/rimstddrilled28hdoublewalletrto349

But yours is listed as 328, Are you able to confirm the ERD? Thanks
SJS Customer Service:
Hi,

We've just got a rim out of stock to measure and check. What Brompton have measured is the inside to inside measurement of the rim rather than actual ERD which is correct at 328mm.

Thanks.
Brompton Front Wheel Build Dynamo Hub
By
08 Aug 2014
Hi thanks for your response. Just a little confused though. As this is a front wheel would the spoke lengths not be the same length? They usually are on front wheels.

Why would an asymmetric dish of the wheel be required on a front wheel?

Ie should it not be 153mm both sides?

Regards, Jonathan
SJS Customer Service:
Hi, I've checked with the wheel builder & this hub is slightly dished so you will have two different spoke lengths. However, he has built these before & the spoke length that you were previously given from the spoke calculator was slightly wrong, you will actually require lengths of 152mm on the plain side & 150mm on the connector side. Regards, Jamie
Spoke Lengths For A Sp Dynamo Hub On Std Brompton Rim
By
08 Aug 2014
Hi,

Please can you advise what spoke lengths I need to build a dynamo hub front for a Brompton using a std Brompton 16x1 3/8 (349) Std drilled double walled rim (SJS PART 31191) and a
SP Dynamo SV8FB Front Hub 28H Brompton.

I assume this will be cross 2 lacing?

Best regards,

Jonathan
SJS Customer Service:
Hi,

I've worked them out as best I can using an online spoke calculator and got a length of 151mm for the non-drive/ electronic connector side and 153mm for the drive side. This was measured with a 2 cross lacing.

Thanks.