Ryde Andra 20 16 x 1 3/8 349 UP Alloy Rim - Black - 28 Hole

£23.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
An extra strong rim for Bromptons etc.

The rims have directed spoke holes so they are especially suitable for rear hub gears and front dynohubs.

The spoke nipple leaves the rim directed towards the correct hole in the hub to reduce the spoke bend within the nipple.

Must not be built radial

ERD - 323mm
Weight - 370g
Related Products
Product Reviews (0)
Questions & Answers (14) Q & A
Download File  
Related products
Wheel Build with 14g DT Champion Stainless SILVER spokes - per wheel Wheel Build with 14g DT Champion Stainless SILVER spokes - per wheel £47.28 Inc VAT Quick view
Be the first to write a review
Feel free to leave a review of this product, good or bad it helps other customers with their buying decision.
Great Rim For Bromptons
By Anonymous
03 Dec 2015
5 / 5
I recommend this product
ConsA bit more money than the stock Brompton rim
ProsBetter rim than stock Brompton
The standard Brompton tire mounts on to this rim just as easily as on the stock Brompton rim, The angle drilling for the spoke holes greatly reduces the bending at the nipples when laced up on a Sturmey Archer XRF8, W 8Spd hub with a 2x lacing. Overall depth of rim is about 25.5 mm, about 5.5mm more than the stock Brompton rim. The machined brake surface is perhaps 1mm wider than the stock Brompton rim.
Questions & Answers (14)
Can this rim also be used on Brompton front hub? Standard or lightweight front hub.
03 Jun 2021
Thank you for your enquiry, yes will be fine but must not be built radial

WD 03/06/21
What spoke length do I need for this rim with a front SON XS hub?
02 Apr 2021
We have not built this combination, so cannot confirm with complete certainty, but we calculate 141mm.

Thanks - 06/04/21
Type of Drill
03 Feb 2021
What Type of Drill ?
Can I request Angle Drill or Standard Drill ?
Thank you for your enquiry, this rim is only available in standard drill.

Regards WD 03/02/21
Can I use this rim to replace the rim on my SRAM 3/6 speed Brompton hub?
21 Sep 2019
If so what spoke length do I need please? My current length of spoke is 154mm 13g on the older single walled rim. Many thanks.
Yes this would be suitable, however we would strongly consider changing the hub as the SRAM hub sprockets are no longer available.
The BWR hub is here - SJS Cycles part number : 50986
We can build this into an Andra rim for you or suggest spoke length of 144 mm with BWR hub, we do not have the measurements to recommend spokes for a SRAM hub.

Thanks - 24/09/19
Spoke sizes.
15 Jun 2019
I've decided to go for this option (instead of the single-walled rims). So, I was wondering if you could kindly advise me on the correct spoke sizes to fit a Bromton BRW Hub, and a Front Shimano DH-F703-SB.

Hi there,

Unfortunately, the DH-F703-SB only comes with a 24 hole fitting and the rims that you are after do not have this amount of holes im afraid.
Will I be able to reuse the spokes with this rim?
02 Oct 2018
I'm planning to build a standard rear brompton wheel. I bought the wheel from you two years ago. It has the wide range hub.
No you will need different spoke lengths due to the rim ERD size change.

Which spokes and nipples with SV-9 FB hub dynamo?
27 Aug 2018
Hi there,

Please contact our sales team with more information such as the hub width, 100 or 74mm for Brompton?

Could I use these to build some 16" kids bike wheels?
06 Aug 2018
...or are Brompton wheels a special measurement?
You could use these on numerous bicycles, simply the right size for a Brompton.

Can you advise me what length spokes I should order for a Brompton rear hub rebuild (Sachs 3 speed)
19 Sep 2017
I am ordering the Andra 20 angle drilled rim (38518) too

The length that you should need is 158mm spokes.

Are 146Mm Spokes A Valid Alternative?
16 Nov 2016
The only 146mm spokes SJS sells are for front wheels (ie. radial):


Are they a good alternative to build a BWR wheel?

We would recommend sticking to the 145mm length. These Brompton 145mm spokes would be suitable, this length is only used by Brompton normally for the radial front wheels but that is with Brompton rims rather than these rims so they can still be used normally. We also do other 145mm spokes that aren't Brompton spokes that will also work fine.

Spokes To Build Bwr Brompton Wheel?
15 Nov 2016
Which set of spokes nipples should I get to build a BWR-based Brompton wheel?

Thank you.

To build this rim with a BWR hub you'll need 145mm spokes.

Schrader Valve ?
24 May 2016

These rims are drilled for Schrader valves.

Fitting Of Schwalbe Marathon Tire
05 Nov 2015
I have heard that the Schwalbe Marathon Tire is very tight on some 16 inch (349) rims, is this rim easy to fit the tire?

Schwalbe marathons are some of the harder tyres to fit no matter what rims you are running, so although they will definitely fit to these rims, they won't be as easy as some other tyres.

What Is The Erd Of This Rim
05 Nov 2015
Can you please list the ERD of this rim

The ERD of this rim as measured by us is 323mm.