Home > Transmission > Sprockets > Sprockets - Singlespeed & Kits

Gusset Double Six Sprocket 5/64 Inch

Customer Reviews (2)

3.5 / 5| Write your review

£14.99

was

View supersize image

Teeth

£14.99 was

Manufacturer :

SJS Cycles part number :

Manufacturer part number :

Details

- CNC machined Cr-Mo 5/64" single speed cog with broad 7mm base
- HG type spline compatible
- Broad 7mm base avoids the cog ripping into Cassette bodies
- Chrome plated finish
- 12, 13, 14, 15, 16, 17, 18 or 19T

*Note: Are suitable for narrow 5/64" (9 Speed) chains

Product Reviews (2)

Questions & Answers (6) Q & A

Specification

Downloads

Download File

Product Reviews (2)

Overall Product Rating 3.5 / 5

All Good

By Paul Moorhouse

10 Jun 2020

5 / 5

I recommend this product

Consnone

ProsFat Bottom!!

works really well on alloy spines, doesn't cut into the splines like the thin sprockets
Use 8 or 9 speed chain (8 slightly stronger)

loose fit

By PRH

01 Oct 2017

2 / 5

I recommend this product

ConsVery loose fit on the cassette hub

Prosavailable in 19 size

fits very loosely on the cassette hub, rocking from side to side vertically, which counters the purpose of a cog with a wide base, I can only hope that the spacers will keep it vertical, although it will be continuously exerting a lever face against them, speaks of very poor quality control in machining the size

SJS Customer Service:

I'm sure that once tightened with the correct spacers it will be fine, regards Robin

Questions & Answers (6)

Chain Size?

By Neil

04 Jan 2020

Hi, I’m slightly confused, could you clarify if this sprocket is for use with a 3/32 or 5/64 chain?

Many thanks!

SJS Customer Service:

It's for a 9 speed chain, these are often known as 3/32 as a general category but are in fact 5/64, having said that a wider derailleur chain would still work OK but not as quietly. RT 080120

Gusset Double Six - compatible with 7-Speed HG?

By Pascoe Needle

26 Oct 2018

Going for single speed on by (very) old 7-speed MTB. It had a 12-28 HG cassette on it.. The description talks of 3/32 chain, but is the cassette long enough to take the spacers?

Just found an old Claud Butler Mistral that I could from you at the age of 16... you were on the other side of the road then!

thanks,
P

SJS Customer Service:

Hi there,

You should be able to do this without an issue, however we have never done this so we cannot say for certain.

Thanks.

Can I use the gusset slink 3/32 chain with this?

By Neil Marchant

11 Jul 2018

SJS Customer Service:

HI there,

As this is designed to be used with a 3/32 chain you could do this without an issue.

Thanks.

Compatibility...

By PRH

01 Oct 2017

Hello,instead of the 3/32" that I ordered, you sent me a 5/64"... can a 3/32" chain be used with this cog....?

(an odd mistake as you don't seem to offer a 5/64" on your site at all)

SJS Customer Service:

Thanks for pointing it out. In fact this sprocket is for 9 speed chains so our description is wrong, should say 1/2"x5/64" (9Sp) I'll get it changed.

Are These Sprockets Compatable With An 11Spd Chain? Thanks.

By Brian

27 May 2016

Double six 5/32" sprocket

SJS Customer Service:

Hi,

These sprockets are not compatible with an 11spd chain i'm afraid, they're designed for use with a 3/32" chain which is the same gauge as a lot of single speed chains and 8spd chains.

Thanks.

Compatibility Gusset Cog Campy

By Alexis

04 Apr 2015

Hello,
Could you tell me if this gusset cog fits in my campagnolo 10 speed freehub body? I would like to convert it into singlespeed with a 16T or 17T. Is it the same model as the one in the 18T gusset kit? Thank you

Regards

Alexis

SJS Customer Service:

Hi,

These sprockets are designed to fit to Shimano free-hubs and are not the same as in the kit. We are able to special order the same Campagnolo sprockets used in the kit in 16T or 17T if you wish. For more information on ordering these; price/lead time etc. please contact [email protected].

Thanks.