Nitto Technomic NTC-225 1 Inch Quill Stem - 25.4mm Clamp

Customer Reviews (1)
4 / 5| Write your review
£54.99
was
Length
£54.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
Available in sizes of 50, 60, 70, 80, 90, 100 and 110mm
Bar Clamp: 25.4mm
Length: 225mm
Product Reviews (1)
Questions & Answers (8) Q & A
Specification
Downloads
Download File  
Product Reviews (1)
Overall Product Rating 4 / 5
nice bit of kit
By phil
08 Dec 2023
4 / 5
I recommend this product
Consa little expensive
Prosvery well made and finished
a lovely engineered stem which does everything it says on the tin ,nicely finished and polished ,I have needed to change to a shorter stem for a while and am very pleased with this bit of kit thanks
Questions & Answers (8)
Can you confirm the diameter of the stem please - is it 22.2 or 23.8?
By
31 Aug 2021
Hi
This stem has a diameter of 22.2mm, we hope this helps.
Kind Regards. JP 01/09/21
what weight is this with 90mm reach please?
By
09 Sep 2020
Hello, With fixtures and fittings approx 370G

JK 09.09.20
Can i use this with 25 mm Pivo bar?
By
06 Apr 2019
This is for 25.4mm, we couldn't recommend using it with any other size.

Thanks - 08/04/19
Can I use this with cinelli road bars?
By
14 Apr 2018
Hi

Thank you for your enquiry, you will be able to use this stem with your Cinelli bars only if they can be fitted to a stem with a 25.4mm clamp. If the clamp size is larger then it wont fit unfortunately.

Kind Regards
How is the length measured?
By
11 Sep 2017
How is the 225mm length defined according to the stem geometry? I'd like to compare it with my existing quill stem which is too low.
Thanks.
Hello,

The measurement is measured from the top where it angles to the bottom where it angles to the bottom of the thread at the bottom.

Thanks.
Length of horizontal extension
By
05 Aug 2017
Do the length options 50 to 120 refer to the length of the (almost) horizontal part of the stem rather than the vertical length?
Is the vertical length only available in 225mm?
Thanks
Yes, the length ranger refers to the forward extension measured centre to centre. There are 2 other HEIGHTS available see item # 27441 and 27443
How Can I Get A 130Mm Or 140 Mm Version Of This Product?
By
29 Jan 2017
Nitto Technomic NTC-225 1 Inch Quill Stem - 25.4mm Clamp
Hi,

Unfortunately the longest size we can now get these in is 110mm.

Thanks.
Choosing The Right Height.
By
07 Jan 2015
Hello!
What is the maximum length of this stem from the edge of a headset to the top? And how long is the shortest allowed part that must be inside the steering tube?
Is its "horizontal" part tends to be horizontal when installed on a road frame? Or it would be lower than the top? If so, how much lower? (if it matters: I own Coppi steel frame from 1980th with aprox. 72 degree steering tube.)

Thank you very much!!
Hi,

The overall height of this stem is 225mm, it allows for a minimum of 80mm to be in the frame and a maximum of 145mm to be above the headset. The extension part of the stem would sit slightly below horizontal, but not by as much as other stems, it would depend on the length to how much it dropped by.

Thanks.