Profile Design Stem Convertor 1 inch Quill to 1 1/8 inch Threadless

Customer Reviews (2)
4.5 / 5| Write your review
£14.99
was
£14.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Details
- Threadless conversion for threaded forks allowing a larger range of modern stems to be fitted to older bikes
- Converts a 1 inch quill bike to accept 1 1/8 inch threadless stems
- Aluminium body, steel bolt
- Weight: 160 grams
- Total length = 135mm, 42mm at the top is for fitting 28.6mm ahead stem, the remaining 93mm can go inside your head-tube, the min insert mark is 73mm from the bottom.

Note: This is for a 1" (25.4mm) fork with a 22.2mm internal diameter.
Product Reviews (2)
Questions & Answers (3) Q & A
Specification
Downloads
Download File  
Product Reviews (2)
Overall Product Rating 4.5 / 5
Perfect Product - Give Life To Your Old Bike
By Bruce Devlin
16 Sep 2012
5 / 5
I recommend this product
Consnone
Prosstrong, simple. reliable
This stem convertor is perfect. If you want to add new bars to your favourite old frame it's the only way to go. Stick it in the 1 inch threaded headset's hole and then clamp a shiny new stem to it. You get lots more choice with this setup and you don't have to remove the brakes every time you need to do a full service.

Magic.
Great Wee Product
By flyingmm
13 May 2011
4 / 5
I recommend this product
ConsNot the cheapest
ProsLooks like it will last
Strong build, easy to fit and transform your headset to ahead.
Questions & Answers (3)
Is there a taper on this step up between the two diameters? Or is it a flat step?
By
04 Aug 2020
I need this as flush as possible to the locking nut and therefore want it as flat as possible.
Hi, yes there is a taper of about 45 degrees. It will not fit flush with a lock nut. Thanks
bike question
By
16 May 2018
hi can the Profile Design Stem Convertor 1 inch Quill to 1 1/8 inch Threadless have a added stem top cap or not thanks
You will need to use the provided top cap as it is designed to fit the larger bolt running through the adapter, you could fit another, but it would need to be the same dimensions.

Thanks
Will This Fit Into A 25,4Mm Id Threaded Fork?
By
26 Feb 2015
I suspect this fits the (B) type below.
(A) 1" OD/22mm ID
(B) 1 1/8 OD/ 25,4mm ID
Hi

This stem adapter has a OD of 22.2mm diameter which is designed to be fit to a 1" inch fork with an external diameter of 25.4mm.

Regards, Jamie