Call us on 01278 441500

Park Tool CNW-2 Chainring Nut Wrench

Customer Reviews (4)
2.3 / 5| Write your review
£3.99
was
Details
Similar Products
Product Reviews (4)
Questions & Answers (0) Q & A
Details
The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts.

The outer width of both ends of the CNW-2 are nominally 12mm wide. One end has a two outer tips nominally 2.7mm wide each, and the other end has tips of 3.8mm each. The blade thickness is nominally 1.35mm
Specification
Downloads
Download File  
Similar products
Park Tool CCW-5 Crank Bolt Wrench - 14mm Socket & 8mm Hex Wrench Park Tool CCW-5 Crank Bolt Wrench - 14mm Socket & 8mm Hex Wrench £12.99 Inc VAT Quick view
Park Tool BBT-10 HollowTech II Bearing Adjuster Cap Tool Park Tool BBT-10 HollowTech II Bearing Adjuster Cap Tool £12.99 Inc VAT Quick view
Product Reviews (4)
Overall Product Rating 2.3 / 5
Pretty Poor, But Cheap.
By
23 Nov 2012
2 / 5
I had to take a dremel to this and trim the edges as they were too tight.
If your bolts come through the back sligtly then this tool doesn't fit.
It just about does the job after my modication however.

If your bolts don't come near sticking out the back at all this should work fine, but why they didn't just make the gaps 1mm wider to allow for this I don't know.
Useful Tool
By
18 Oct 2011
3 / 5
Expensive for such a simple tool. The locating spigot could be slightly longer and wider. A suitably sized flat bladed screw driver might also work instead.

I was able to undo and retighten my Stronglight double chainring bolts with the help of this tool. They unscrewed and tightened easily, but required a slight force to prevent the nuts from turning, which this tool did easily.
Lacking Something
By
14 Jul 2011
1 / 5
ConsShort
ProsEasy
Tangs are too short to reach the chainring nuts on a single_ring (short) bolts.
Makes doing_up double_ring bolts easy.
Park Chainring Spanner
By
21 Jun 2011
3 / 5
I recommend this product
Conscould do with a fatter handle so it doesn't hurt when holding tightly
ProsGood value
Just right for the job
Questions & Answers
If you have any questions ask here or phone 01278 441500 (+44 1278 441500).