M-Wave QR Skewer for Single Wheel Trailer

Customer Reviews (4)
4.8 / 5| Write your review
£14.99 Please note this product has selling restrictions to your country. was
Manufacturer : 
SJS Cycles part number : 
Manufacturer part number : 
Replacement QR skewer to allow fitting of M-Wave's Single Track Luggage Trailer to your bike.
Skewer can fit hubs with 130mm or 135mm OLN.

QR axle length- approx 168mm
Product Reviews (4)
Questions & Answers (10) Q & A
Download File  
Product Reviews (4)
Overall Product Rating 4.8 / 5
By Anonymous
26 Jul 2020
4 / 5
I recommend this product
Excellent service from SJS. However due to unforseen circumstances I have not had an opportunity to fit to bike. Seems that will now have to wait a while.

The best laid plans of mice and men, etc
cheapest replacement for a bolt on rear axle trailer
By tony
06 Nov 2018
5 / 5
I recommend this product
Consnone so far
so far so good ,a little loss at the locking end ,but once locked ,it works as it should ,hold the trailer in position and upright and stops it from fish tailing
Excellent Engineering
By Pete
12 Aug 2016
5 / 5
I recommend this product
ProsQuality of design and manufacture
This M-Wave QR Skewer for Single Wheel Trailer is a vast improvement on the one supplied with a bike trailer I bought (not from SJS I'm ashamed to say) some time ago. It is high quality in terms of design and manufacture - I can trust this one!
By Zarkoh
16 Jun 2016
5 / 5
I recommend this product
Good product delivered fast :)
Questions & Answers (10)
Can I get more detailed measurements
23 Apr 2021
I'm looking to get a confirmation on the length of the narrow part of studs. I'm trying to find a replacement for an off brand product and from the answers you gave another person all the diametres are correct.
Thank you for your enquiry, they are 14.5mm

WD 23/04/21
Dimensioned drawing please?
07 Jan 2021
I'm wondering if this could work on a tandem 145mm OLN back end? I've seen the specs and the Q&A re dimensions which suggest that it will depend on the length of receiving thread in the non lever end. If you have any further details, that will be much appreciated - thanks in advance.
For 145 OLN SJS part: 1073 is more likely to be suitable.

Hope this helps- 08.01.21
Can I use my qr axle diam 5mm for the MWave trailer
26 Jun 2020
I'm interested in a MWave folding trailer 16 inch.
My qr axle is 5mm in diameter. Can I use this trailer for my bike?
Hello, Yes I can confirm these are 5mm in diameter.
Skewer strength
05 Jun 2019
Hi we have several trailers for a school d of e group. The current skewers are very poor quality - they bend and the QR levers don’t lock properly so come undone.
Is there much difference between these M wave ones and the Bob ones qualtywise? We want something reliable, but cash is tight for the school.
This is not compatible with BOB trailers RT 070619
length of spindle ?
01 Mar 2019
so the end fittings are 44mm total - is the spindle that goes inside the axle169mm in addition to this? I need 6mm over my standard mtb spindle lent to fit a rear trailer.
This length is 170mm.

Thanks - 04/03/19
what length is the skewer?
21 May 2018
Hi, I am looking to use this with a fixed wheel on a Navigator track hub, and wondering how much thread I'll have to play with when the skewer is put through?


This skewer is designed for use with a trailer on the rear of a bike with an OLN measurement of either 130mm or 135mm, the skewer length is 169mm.

Kind Regards
Compatable with other single wheel trailers?
28 Jul 2017
I would be most grateful if you are able to answer my query. I am looking to purchase a 2nd hand vidaxl single wheel trailer that is missing the all essential extended skewer! Would the m~wave skewer be compatable?
Many thanks in advance for any expertise that may assist,

Ian Ward

Unfortunately as we don't stock those trailers we don't have any way of knowing what type of fittings they use. If the fittings are the same as this M-Wave skewer then it should be fine to use with that trailer.

Replacement axle delivery?
18 Jul 2017
Hi, I have one of these trailers. The axle that I have had a quick release failure and is significantly bent. I have jury-rigged it to get home. I am currently in Foix heading for Amsterdam and in UK from 1/8 onwards. Can you think of any way I can order this and get it delivered to somewhere for collection so I can replace the one I have? I have no fixed address in France,Belgium or Holland. I do have an address of a hotel where I will be staying in London on 1/8. Suggestions welcomed as to how I can order this replacement. Thanks, Stu

When you place an order through the website you can select a different delivery address, so if you know the address of the hotel you can have it delivered there. You would need to check with them that they would be happy to receive it for you first though.

Compatible With Revolution Cargo Trailer
09 May 2017
Will this quick release be compatible with the Revolution Cargo Trailer and a 8 speed road bike with 700c wheel?

Unfortunately as we don't stock your make of trailer we have no way of knowing what fittings it requires, if the previous skewer looks identical to this one then it should work as a lot of trailers do use the same fitting design. This skewer will be fine for use with an 8spd hub on a road bike with 700c wheels.

What Are Its Dimesnions?
13 Apr 2016
Particularly the dimensions of the fixings on each end i.e. diameter. It's a product I'm very interested in buying.

The fittings on each end are 44mm in total length, with the main body being 19mm in diameter, the narrow part is 9mm in diameter and the ball on the end is 12mm in diameter.