Call us on 01278 441500

Shimano Alivio FC-M431-8 Chain Guard & Fixing Bolts - 48T - Y1M298160

Customer Reviews (1)
5 / 5| Write your review
£7.99
was
Details
Product Reviews (1)
Questions & Answers (6) Q & A
Details
For use with Shimano Alivio FC-M431-8 9spd Triple Chainsets with a 48-36-26T set up.

This Chain Guard can also be used on the following chainsets:

- Shimano Alivio FC-M431
- Shimano Alivio FC-M430-8
- Shimano Alivio FC-M430
- Shimano Acera FC-M391-8
- Shimano Acera FC-M391
- Shimano FC-M371
- Shimano FC-T521

These are an "A" match which indicates that the parts are the same in materials, appearance, finish & size etc.

If the correct Chain Guard is unavailable you can also use the chain guard from the following chainsets:

- Shimano Deore FC-T611
- Shimano FC-T551

These are a "B" match which indicates that the parts are usable, but differ in materials, appearance, finish & size etc.

Genuine Shimano replacement part.
Specification
Downloads
Download File  
Product Reviews (1)
Overall Product Rating 5 / 5
M391
By
30 Apr 2016
5 / 5
I recommend this product
ConsMakes it a tiny bit harder to adjust Front Derailleur
ProsKeeps trousers clean, prevents derailment
This also fits the FCM391 (square and octalink). Took 5 minutes to fit. Arrived really quickly, ordered Saturday night arrived Saturday morning on the cheapest delivery option.
Questions & Answers (6)
Will This Fit For A Shimano Fc-T4010 48/38/28 Chainset?
By
19 Aug 2016
I'm trying to find a suitable chain guard for my Shimano FC-T4010 48/38/28 chainset. Will this one fit, or is there any other in your selection that you would recommend?
SJS Customer Service:
Hi,

This would not be the correct chainguard for your chainset I'm afraid, the chainguard you need is SJSC part number 38689.

Thanks.
Will This Guard Fit My Raleigh Altare Chainwheel
By
04 May 2015
My cycle has Shimano gears with a 48 tooth main chain wheel. The plastic guard has shattered, the original has a measurement of 11.5mm between the fixing points. It looks very similar to the orig.
SJS Customer Service:
Hi,

The distance between the bolt holes in this guard is 120mm, so I doubt it will be a suitable replacement for your previous guard.

Thanks.
Will This Fit On A Suntour Xcr 48T Crankset?
By
13 Aug 2014
Mine has snapped off beyond repair. It has four holes with a BCD of 170mm.
SJS Customer Service:
Hi, it has the same BCD measurement but we don't stock any of the Suntour chainsets so whether the fitting system is the same we couldn't answer. The Shimano chainguard is supplied with 4 small screws so if that is the same as your current system then it should be fine. Regards, Jamie
Will This Item Fit The Chain Ring Of A Specialized Hotro
By
11 Aug 2014
Will this time fit the chain ring of a Specialized Hotrock cycle?
SJS Customer Service:
Hi, its hard to say whether this will fit or not without knowing the chainset that you have fitted to the bike & whether it will accept a chainguard designed for a 104mm BCD chainset. If you could email an image with some details of the bike to sales@sjscycles.com & we will see if everything is ok. Regards Jamie
Is There A Chain Guard To Fit Shimano Fc M591 Chainwheel
By
08 Aug 2014
Diamondback Contra 700
Shimano Deore front and rear derailleur 27 gear
SJS Customer Service:
Hi, there isn't a specific chainguard available to fit the FC-M591 chainset however this one should still fit as it has the same Bolt Circle Diameter & it looks as though it uses the same fixing screws. We cannot guarantee that it is exactly the same but they do look similar. Regards Jamie
Will This Chainguard Fit A Deore Chanset Same Teeth?
By
24 Jul 2014
SJS Customer Service:
Hi,

Unfortunately it will not, this chainguard fits to a specific outer chainring from an Alivio chainset designed to take a guard. There are a few models of Deore that can accept a chainguard, but it is unlikely to be this guard that's used and to know I would require the exact model number printed on the rear of the crank arm.

Thanks.