Shimano Deore XT FC-T781 Chain Guard & Screws - 44T - Y1MP98070
£9.99
was
£9.99
was
Manufacturer :
SJS Cycles part number :
Manufacturer part number :
Details
For use with Shimano Deore XT FC-T781 10 speed triple chainsets with a 44-32-24T set up.
This chain guard can also be used on the following chainset:
- Shimano Deore LX FC-T671
Outer diameter: 190mm
Bolt centre to centre measurement: 100mm
This is an "A" match which indicates that the parts are the same in materials, appearance, finish & size etc.
If the correct chain guard is unavailable you can also use the guard from the following chainsets:
- Shimano Deore XT FC-M771-K
- Shimano FC-T551
These are a "B" match which indicates that the parts are usable, but differ in materials, appearance, finish & size etc.
Genuine Shimano replacement part.
This chain guard can also be used on the following chainset:
- Shimano Deore LX FC-T671
Outer diameter: 190mm
Bolt centre to centre measurement: 100mm
This is an "A" match which indicates that the parts are the same in materials, appearance, finish & size etc.
If the correct chain guard is unavailable you can also use the guard from the following chainsets:
- Shimano Deore XT FC-M771-K
- Shimano FC-T551
These are a "B" match which indicates that the parts are usable, but differ in materials, appearance, finish & size etc.
Genuine Shimano replacement part.
Specification
Downloads
Download File
Questions & Answers (6)
Is it compatible with SHIMANO, DEORE XT, FC-M770
By Nikolay Naydenov
11 Jun 2018
SHIMANO, DEORE XT, FC-M770, 44x32x22T
SJS Customer Service:
None of the M770 chainsets have the fittings for a bash guard, so unfortunately this will not fit.
Thanks
Thanks
Fonctionne avec plateau 44 d fc m591 ?
By Claude
28 Mar 2018
SJS Customer Service:
Hi there,
This is not listed to fit the fc-591.
Thanks
This is not listed to fit the fc-591.
Thanks
Would This Fit The Deore M590?
By Stephen Martin
25 Apr 2017
SJS Customer Service:
Hi,
Unfortunately not as the original chainring for the M590 was not threaded where as this chainguard requires a threaded chainring.
Thanks.
Unfortunately not as the original chainring for the M590 was not threaded where as this chainguard requires a threaded chainring.
Thanks.
What Is The Material Of This Chainguard?
By Raffi
08 Sep 2016
Plastic or alloy?
SJS Customer Service:
Hi,
This chainguard is made from plastic.
Thanks.
This chainguard is made from plastic.
Thanks.
Will This Fit Shimano M440 Chainring?
By Brian Crawford
22 Aug 2016
PCD of pre drilled holes is 155mm
SJS Customer Service:
Hi,
We have never tried to fit it to a M440 chainring so we can't say for sure but this uses the same 155mm spacing so hopefully should fit okay.
Thanks.
We have never tried to fit it to a M440 chainring so we can't say for sure but this uses the same 155mm spacing so hopefully should fit okay.
Thanks.
What Is The Measurement From One Screw Hole To The Next? Also, Measure Across To The Opposite Hole?
By Mark
17 Aug 2016
Having these measurements will enable me to know whether this item will fit my bike.
SJS Customer Service:
Hi,
The bolts are in a square pattern so are equal distance apart. They are 110mm apart from each other.
Thanks.
The bolts are in a square pattern so are equal distance apart. They are 110mm apart from each other.
Thanks.